Website-Einstellungen

Lager
Spracheinstellungen
Währungseinstellungen
Produkte
Informationsmaterial
Informationsmaterial
Video-Bibliothek
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
Inductors Explained by Coilcraft & Mouser
XGL4020 Ultra-low DCR Power Inductors

ZF3205-AE LLC Half-Bridge Transformers

for AHV85312 eval board by Allegro MicroSystems

RoHS-konform Halogenfrei AEC-Q flag
The ZF3205-AE is an automotive grade transformer designed for EV and HEV power electronics. It features low interwinding capacitance to minimize EMI and deliver exceptionally high Common Mode Transient Immunity (CMTI), making it ideal for On-Board Chargers (OBCs), DC-DC converters, and traction inverter applications. Designed for reliability in high power environments and fully AEC-Q200 qualified, it ensures robust performance under the rigorous electrical, thermal, and vibration conditions required in modern electric vehicle systems.
  • Optimized for AHV85312 eval board by Allegro MicroSystems
  • Low interwinding capacitance to minimize EMI and achieve high CMTI
  • Ideal for automotive OBC and traction Inverters in EV/HEV
  • AEC-Q200 qualified

Jetzt kaufen:
Anzahl Einzelpreis
1 $3,95
100 $3,23
400 $2,42
800 $1,46
1000 $1,14

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

. Auf Lager, noch heute versandbereit.
Muster anfordern:

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1
(Hover for schematics)
Induktivität
bei 0A (µH) 2
(Toleranz: ±25%)
DCR max 3 Leakage
Inductance
±20% (µH) 4
Windungsverhältnis Kapazität
max (pF) 5
Isolations-
spannung (Vrms) 6
Pri (Ω) Sec (Ω) Pri : Sec
ZF3205-AEC 20 0,18 0,30 2 1 : 1.7 0,6 3535
Hinweise
  1. When ordering, please specify packaging code: e.g. ZF3205-AEC
  2. Inductance measured at 1 MHz, 0.1 Vrms, 0 ADC on an Agilent 4263B (or equivalent).
  3. DCR is measured on a Keithley 580 Micro-ohmmeter (or equivalent).
  4. Leakage Inductance LL is measured at 1 MHz, 0.1 Vrms with pins 3 and 4 shorted.
  5. Interwinding capacitance is measured at 250 kHz, 0.1 Vrms across pins 1 – 4 with pins 2 and 3 open.
  6. 5000 VDC / 3535 Vrms, one minute isolation (hipot) measured between primary and secondary.
Designed per IEC 61558-1 to meet the following requirements. Please contact [email protected] for questions about suitability for use in other application conditions.
 
Reinforced insulation example Basic insulation example
Working voltage 400 V Working voltage 800 V
Altitude 2500 m Altitude 2500 m
Overvoltage category II Overvoltage category II
Pollution degree 2 Pollution degree 2

5.9 mm creepage and clearance between primary and secondary windings with Material Group IIIa.
 

Anschlüsse:

  • RoHS compliant tin over nickel over silver glass frit.

Verpackung:

  • C = 7" machine-ready reel
    EIA 481 embossed plastic tape (400 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • D = 13" machine-ready reel
    EIA 481 embossed plastic tape. Factory order only, not stocked (1200 parts per full reel).
Umwelt/Umgebung
Umwelt/Umgebung:
RoHS-konform , Halogenfrei
Umgebungstemperaturbereich:
−40°C to +125°C
Lagertemperaturbereich:
Component: −40°C to +140°C
Tape and reel packaging: −40°C to +80°C
Maximale Bauteiltemperatur:
+140°C
Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

Pläne/Diagramme


zf3205s.gif




 

Physikalische Eigenschaften

zf3205d.gif

dims_inches_mm.gif

Gurt/Rolle-Spezifikationen

tapereel_pl.gif
 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_cg.jpg
400 1200* 178/330 60/100 13 30,4 24,4 24 8 4 2 5,5 0,40
* Special order

Allgemeine Spezifikation

Kernmaterial:
Ferrite
Gewicht:
0.53 − 0.54 g
Verpackung:
400/7" reel; 1200/13" reel Plastic tape: 24 mm wide, 0.4 mm thick, 8 mm pocket spacing, 5.5 mm pocket depth

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
Löttemperaturbeständigkeit:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles.
Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.
Baugruppenreinigung:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

Verwandte Produktreihen