Website-Einstellungen

Lager
Spracheinstellungen
Währungseinstellungen
Produkte
Informationsmaterial
Informationsmaterial
Video-Bibliothek
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

GA343x Flyback Transformers

for 12 Volt Nominal Input

RoHS-konform
  • Developed for applications with 10 – 14 V input
  • Bias winding provides power to the chipset
  • RoHS-compliant. 260°C compatible. Tin-silver (96.5/3.5) over tin over nickel over phos bronze terminations
Jetzt kaufen:
Anzahl Einzelpreis
1 $3,67
250 $2,95
500 $1,96
1000 $1,64
2500 $1,47
5000 $1,34

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

. Auf Lager, noch heute versandbereit.
Muster anfordern:

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1
(Hover for schematics)
Leistung (W) Eingangsspannung (V) Induktivität
bei 0A (µH) 2
(Toleranz: ±10%)
Induktivität
min bei   2,1 A (µH)
DCR max (mΩ) 3 Streu-
induktivitätmax (µH) 4
Windungsverhältnis 5 Frequenz (kHz) Isolations-
spannung (Vrms) 6
Sekundär-
Ausgang (V, A) 7
Pri Sec Aux Pri : Sec : Aux
GA3430-BL_ 5 10 14 25,0 22,5 90,0 15,0 95,0 0,685 1 : 0.2 : 0.2 250 1500 5 V , 1 A
GA3431-BL_ 5 10 14 25,0 22,5 90,0 5,0 70,0 0,945 1 : 0.143 : 0.143 250 1500 3,3 V , 1,5 A
Hinweise
  1. When ordering, please specify packaging code: GA3431-BLD.
  2. Inductance is for the primary, measured at 250 kHz, 0.3 Vrms, 0 Adc.
  3. DCR for the secondary is per winding.
  4. Leakage inductance measured between pins 3 and 4 with all secondary pins shorted.
  5. Turns ratio is with the secondary windings connected in parallel.
  6. 1500 Vrms isolation from primary and bias to secondary;
    500 Vrms isolation from primary to bias, tested for one minute.
  7. Output is with the secondary windings connected in parallel. Bias winding output: 5.0 V, 20 mA (GA3430); 3.3 V, 20 mA (GA3431).

Anschlüsse:

  • RoHS tin-silver over tin over nickel over phos bronze. Other terminations available at additional cost.

Verpackung:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
Umwelt/Umgebung
Umwelt/Umgebung:
RoHS-konform
Umgebungstemperaturbereich:
–40°C to +85°C
Lagertemperaturbereich:
Component: –40°C to +85°C.
Packaging: –40°C to +80°C
Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

Pläne/Diagramme

ga3429s-(1).gif

Secondary windings to be connected
in parallel on the PC board

Physikalische Eigenschaften

ga3429d-(1).gif


dims_inches_mm-(5).gif

Gurt/Rolle-Spezifikationen

tapereel_pl-(43).gif


 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_f-(2).gif
250 330 100 13 38,4 32,4 32 20 4 2 11,2 0,5

Allgemeine Spezifikation

Kernmaterial:
Ferrite
Gewicht:
3.9 to 4.1 g
Verpackung:
250 per 13″ reel Plastic tape: 32 mm wide, 0.5 mm thick, 20 mm pocket spacing, 11.2 mm pocket depth.