站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

ZF3205-AE LLC Half-Bridge Transformers

for AHV85312 eval board by Allegro MicroSystems

符合RoHS 无卤素 AEC-Q flag
The ZF3205-AE is an automotive grade transformer designed for EV and HEV power electronics. It features low interwinding capacitance to minimize EMI and deliver exceptionally high Common Mode Transient Immunity (CMTI), making it ideal for On-Board Chargers (OBCs), DC-DC converters, and traction inverter applications. Designed for reliability in high power environments and fully AEC-Q200 qualified, it ensures robust performance under the rigorous electrical, thermal, and vibration conditions required in modern electric vehicle systems.
  • Optimized for AHV85312 eval board by Allegro MicroSystems
  • Low interwinding capacitance to minimize EMI and achieve high CMTI
  • Ideal for automotive OBC and traction Inverters in EV/HEV
  • AEC-Q200 qualified

立即购买:
计数 单价
1 $3.95
100 $3.23
400 $2.42
800 $1.46
1000 $1.14

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

规格

Electrical specifications at 25°C.

零件号 1
(Hover for schematics)
0A时的
电感 (µH) 2
(公差: ±25%)
DCR max 3 Leakage
Inductance
±20% (µH) 4
匝数比 电容
max (pF) 5
隔离
电压 (Vrms) 6
Pri (Ω) Sec (Ω) Pri : Sec
ZF3205-AEC 20 0.18 0.30 2 1 : 1.7 0.6 3535
注释
  1. When ordering, please specify packaging code: e.g. ZF3205-AEC
  2. Inductance measured at 1 MHz, 0.1 Vrms, 0 ADC on an Agilent 4263B (or equivalent).
  3. DCR is measured on a Keithley 580 Micro-ohmmeter (or equivalent).
  4. Leakage Inductance LL is measured at 1 MHz, 0.1 Vrms with pins 3 and 4 shorted.
  5. Interwinding capacitance is measured at 250 kHz, 0.1 Vrms across pins 1 – 4 with pins 2 and 3 open.
  6. 5000 VDC / 3535 Vrms, one minute isolation (hipot) measured between primary and secondary.
Designed per IEC 61558-1 to meet the following requirements. Please contact [email protected] for questions about suitability for use in other application conditions.
 
Reinforced insulation example Basic insulation example
Working voltage 400 V Working voltage 800 V
Altitude 2500 m Altitude 2500 m
Overvoltage category II Overvoltage category II
Pollution degree 2 Pollution degree 2

5.9 mm creepage and clearance between primary and secondary windings with Material Group IIIa.
 

端子:

  • RoHS compliant tin over nickel over silver glass frit.

包装:

  • C = 7" machine-ready reel
    EIA 481 embossed plastic tape (400 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • D = 13" machine-ready reel
    EIA 481 embossed plastic tape. Factory order only, not stocked (1200 parts per full reel).
环境
环境:
符合RoHS , 无卤素
环境温度范围:
−40°C to +125°C
储存温度范围:
Component: −40°C to +140°C
Tape and reel packaging: −40°C to +80°C
最高元件温度:
+140°C
故障率(FIT)/平均故障间隔时间(MTBF):

原理图


zf3205s.gif




 

物理特性

zf3205d.gif

dims_inches_mm.gif

卷装规格

tapereel_pl.gif
 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_cg.jpg
400 1200* 178/330 60/100 13 30,4 24,4 24 8 4 2 5,5 0,40
* Special order

一般规格

核心材料:
Ferrite
重量:
0.53 − 0.54 g
包装:
400/7" reel; 1200/13" reel Plastic tape: 24 mm wide, 0.4 mm thick, 8 mm pocket spacing, 5.5 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles.
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品系列