Datasheet 3D Model

GA3366-BL Flyback Transformer

for ON Semiconductor NCP1606

Developed for ON Semiconductor NCP1606 PFC Controller
Designed for 90 W application

立即购买:

计数	单价
1	$8.75
100	$7.49
250	$6.53
500	$5.66
1000	$4.93
2500	$4.23
5000	$3.87

对于大批量采购或非库存产品，点击这里请求报价。

. 现货，可今天发货.

索取样品:

典型应用

与ON Semiconductor NCP1606一起使用

AC Input Voltage	输出 1		功率	Fsw
AC Input Voltage	Sec	Aux	功率	Fsw
85 V — 265 V	19.5 V , 4.62 A	16 V , 0.02 A	90 W	100 kHz

规格

Electrical specifications at 25°C.

零件号 (Hover for schematics)	0A时的电感 (µH) 2 (公差: ±10%)	最小电感 3.1 A (µH)	DCR max 3			最大漏电感 (µH)	匝数比	隔离电压 (Vrms) 4
零件号 (Hover for schematics)	0A时的电感 (µH) 2 (公差: ±10%)	最小电感 3.1 A (µH)	Pri (Ω)	Sec (mΩ)	Aux (mΩ)	最大漏电感 (µH)	Pri : Sec : Aux	隔离电压 (Vrms) 4
GA3366-BL	300	270	0.210	5.300	73.000	7.45	1 : 0.147 : 0.118	3000

注释

Output of the auxiliary winding is 16 V, 20 mA.
Inductance measured at 100 kHz, 1.1 Vrms, 0 Adc using an Agilent/ HP 4263B impedance analyzer or equivalent.
DCR for the secondary is with the windings connected in parallel
3000 Vrms primary and auxiliary to secondary isolation.

端子:

L = RoHS compliant tin-silver over tin over copper.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

环境

环境:

符合RoHS

环境温度范围:

–40°C to +125°C

储存温度范围:

Component: –40°C to +125°C.
Tray packaging: –40°C to +80°C

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

原理图

Secondary windings to be connected
in parallel on the PC board

物理特性

一般规格

核心材料:

Ferrite

重量:

68 g

包装:

30 parts per tray

清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

PCB清洗:

PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf.

仓库

语言设定

货币设定

GA3366-BL Flyback Transformer

for ON Semiconductor NCP1606

所选配置不可用

典型应用

规格

端子:

原理图

物理特性

一般规格

清洗

警告