站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

IFLY0012 DC-DC Flyback

Transformer for Telecom

符合RoHS
  • Designed specifically for use with Intersil ISL6401 family
  • Low profile design
立即购买:
计数 单价
1 $3.68
200 $2.77
400 $1.85
1000 $1.55
5000 $1.27

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与Intersil  ISL6401一起使用

输入电压 输出 功率 Fsw
Sec1 Sec2 Sec3
9 V 20 V -24 V , 0.17 A -24 V , 0.17 A -24 V , 0.17 A 4.1 W 600 kHz

规格

Electrical specifications at 25°C.

零件号 1 0A时的
电感 (µH) 2
(公差: ±10%)
最小电感
  6.5 A (µH)
DCR max (Ω) 最大
漏电感
(µH)
匝数比 隔离
电压 (Vrms) 3
Pri Sec1 Sec2 Sec3 Pri : Sec1 : Sec2 : Sec3
IFLY0012L_ 6.0 4.8 0.021 0.690 0.690 0.690 0.3 1 : 3 : 3 : 3 500
注释
  1. When ordering, please specify packaging code: IFLY0012LD.
  2. Inductance is for the primary, measured at 100 kHz, 1.0 Vrms.
  3. Isolation is from primary to secondary, tested for one minute. 500 Vrms, one minute primary to secondary.

端子:

  • RoHS-compliant. 260°C compatible. Tin over nickel over phos bronze terminations.

包装:

  • D = 13" machine-ready reel
    EIA RS-481 clear plastic tape (200 parts per full reel).
  • B = Less than full reel
    In tape, not machine ready.  To have a leader and trailer added ($25 charge), use code letter D instead.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +85°C
储存温度范围:
Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

原理图

IFLY0012s-(1).gif

物理特性

ifly0012d.gif

 
  • A max
B max C max D nom E nom F nom  
0.925 0.675 0.360 0.591 0.148 0.079 × 0.110 inches
23,5 17,15 9,14 15,01 3,76 2,01 × 2,79 mm

卷装规格

tapereel_pl-(52).gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c-(11).gif
200 330 100 13 50,4 44,4 44 28 4 2 9,6 0,4

一般规格

核心材料:
Ferrite
重量:
5.2 g
包装:
200/13″ reel Plastic tape: 44 mm wide, 0.4 mm thick, 28 mm pocket spacing, 9.6 mm pocket depth

清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
PCB清洗:
Only pure water or alcohol recommended