Datasheet 3D模型

Flyback Transformers for

ON Semiconductor NCP101X

Developed for ON Semi NCP101X Self-Supplied Monolithic Switcher
A9619-CL provides 7 Watts output for 120 Vac applications
B0570-BL provides 15 Watts for 230 Vac applications.
RoHS-compliant. Tin-silver over tin over copper terminations
COTS Plus tin-silver-copper and tin-lead terminations available

立即购买:

零件号

查找我的元件

计数	单价
1	$16.07
250	$9.84
500	$5.91
1000	$4.59
2500	$3.94
5000	$3.62

对于大批量采购或非库存产品，点击这里请求报价。

. 现货，可今天发货.

索取样品:

零件号

查找我的元件

典型应用

与ON Semiconductor NCP101X一起使用

零件号	输入电压	输出	功率	Fsw
A9619-CL	85 V — 130 V	12 V , 0.58 A	7 W	10 kHz
B0570-BL	195 V — 265 V	12 V , 1.25 A	12 W	10 kHz

规格

Electrical specifications at 25°C.

零件号 1 (Hover for schematics)	0A时的电感 (mH) 2 (公差: ±10%)	DCR max 3			最大漏电感 (µH) 4	匝数比	隔离电压 (Vrms) 5
零件号 1 (Hover for schematics)	0A时的电感 (mH) 2 (公差: ±10%)	Pri (Ω)	Sec (mΩ)	Aux (mΩ)	最大漏电感 (µH) 4	Pri : Sec : Aux	隔离电压 (Vrms) 5
A9619-CL	3.2	1.740	40.000	278.000	60	1 : 0.1 : 0.14	2000
B0570-BL	3.4	2.570	38.000	285.000	95	1 : 0.06 : 0.08	3000

注释

When ordering, please specify termination code: e.g. B0570-BL
Inductance is for the primary, measured at 10 kHz, 0.1 Vrms, 0 Adc.
DCR measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Leakage inductance measured at 100 kHz, 0.1 Vrms.
Isolation tested between primary and secondary and between primary and auxiliary windings for one minute.

端子:

L = RoHS compliant tin-silver over tin over copper.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

环境

环境:

符合RoHS

环境温度范围:

−40°C to +85°C

储存温度范围:

Component: −40°C to +85°C
Packaging trays: −40°C to +80°C

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

原理图

物理特性

一般规格

核心材料:

Ferrite

重量:

15.8 – 16.3 g

包装:

81 parts per tray

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested with pure water or alcohol only. More info.

仓库

语言设定

货币设定