站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

PA6284 Flyback Transformer

for STMicroelectronics STEVAL-ILL055V1

符合RoHS
  • Designed for 11 Watt applications with 185 – 264 Vac input
  • 20 V, 10 mA auxiliary winding output
立即购买:

很抱歉,目前我们的网上商店不提供所选元件。

请点击“请求报价”联系支持部门,以获取自定义报价或了解更多信息。

. 现货,可今天发货.
索取样品:

典型应用

与STMicroelectronics STEVAL-ILL055V1一起使用

输入电压 输出 1 功率 Fsw
185 V 264 V 12 V , 0.64 A 12 W 100 kHz

规格

Electrical specifications at 25°C.

零件号 2
(Hover for schematics)
0A时的
电感 (mH) 3
(公差: ±10%)
DCR max (Ω) 4 最大
漏电感
(µH) 5
匝数比 隔离
电压 (Vrms)
Pri Sec Aux Pri : Sec : Aux
PA6284-AL_ 1.40 3.030 0.085 0.570 25 1 : 0.136 : 0.144 1500
注释
  1. Output is of the secondary winding. Auxiliary winding output:20 V, 10 mA.
  2. When ordering, please specify packaging code: e.g. PA6284-ALD
  3. Inductance measured at 100 kHz, 1.0 Vrms, 0 Adc
  4. DCR for the secondary is with the windings connected in parallel, measured at 25°C. For other
    operating temperatures, use this DCR at Temperature calculator.
  5. Leakage inductance is for the primary and is measured with the secondary shorted.

端子:

  • RoHS tin-silver over tin over nickel over phos bronze.

包装:

  • D = 13" reel, machine-ready
    EIA-481 embossed plastic tape (175 parts per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter D instead.
环境
环境:
符合RoHS
环境温度范围:
−40°C to +85°C
储存温度范围:
Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C
最高元件温度:
+125°C (ambient + temp rise)
故障率(FIT)/平均故障间隔时间(MTBF):

原理图

pa6284s.gif

物理特性

pa6284d.gif

卷装规格

tapereel_pl-(1).gif
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c-(1).gif
750 330 100 13 38,4 32,4 32 28 4 2 12,93 0,5

一般规格

核心材料:
Ferrite
重量:
6.2 g
包装:
175 per 13″ reel Plastic tape: 32 mm wide, 0.5 mm thick, 28 mm pocket spacing, 12.93 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.