站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

ZB1347

Isolated Buck Transformer

符合RoHS 无卤素 AEC-Q flag
Engineered for high-frequency performance, the ZB1347-AE isolated buck transformer operates efficiently from 300 – 750 kHz with a 5 V input, delivering stable, low-noise power conversion for demanding systems. Its rugged magnetic construction ensures reliable isolated power for telecom servers, service robots, energy-storage systems, and other industrial applications. Fully AEC-Q200 qualified, it meets the reliability requirements for automotive and mission-critical designs. In addition to iso-buck operation, the design also supports Flyback topologies, providing flexibility for compact, high-efficiency power stages.
 
  • Designed for bidirectional disconnect board EVAL_BDPS_DD_TOLL from Infineon
  • Optimized for 300 – 750 kHz with 5 V input
  • Suitable for telecom servers, service robots, energy storage and similar industrial applications
  • AEC-Q200 qualified
  • Versatile design also provides for use in Flyback topologies

典型应用

与Infineon EVAL_BDPS_ DD_TOLL一起使用

输入电压 输出 1 功率 Fsw
5 V 12 V , 0.2 A 2.4 W 500 MHz

规格

Electrical specifications at 25°C.

Transformer

零件号 2
(Hover for schematics)
0A时的
电感 (µH) 3
(公差: ±10%)
Isat (A) 4 DCR max 最大
漏电感
(µH) 5
匝数比 隔离
电压 (Vrms) 6
Pri (Ω) Sec1 (Ω) Sec2 (Ω) Pri : Sec1 : Sec2
ZB1347-AED 135 1.5 0.268 3.6 2.9 0.60 1 : 2 : 2 1500
注释
  1. 12 V, 0.2 A output is for secondary 1 and secondary 2 windings.
  2. Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic tape (200 parts per reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  3. Inductance is for the primary, measured at 500 kHz, 0.1 Vrms, 0 Adc.
  4. DC current that causes the primary inductance drop 30% from its value without current.
  5. Leakage Inductance is for the primary, measured with secondary windings shorted together.
  6. 1500 Vrms, one minute isolation (hipot) from primary to secondary.

端子:

  • RoHS tin-silver-copper over tin over nickel over phos bronze. Other terminations available at additional cost.

包装:

  • D = 13" machine-ready reel
    EIA-481 embossed plastic tape (200 parts per reel). Quantities less than full reel available: in  tape (not machine ready) or with leader and trailer ($25 charge).
环境
环境:
符合RoHS , 无卤素
环境温度范围:
−40°C to +125°C
储存温度范围:
Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C
最高元件温度:
+165°C (ambient + temp rise)
故障率(FIT)/平均故障间隔时间(MTBF):

性能曲线

原理图

zb1347s-(1).gif


zb1347s_iso-buck-(1).gif




 

物理特性

zb1347d-(1).gif

dims_inches_mm.gif

卷装规格

tapereel_pl.gif
 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_f.jpg
200 330 100 13 38,4 32,4 32 24 4 2 11,2 0,5

一般规格

核心材料:
Ferrite
重量:
4.0 − 4.3 g
包装:
200/13″ reel Plastic tape: 32 mm wide, 0.5 mm thick, 24 mm pocket spacing, 11.2 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品系列