PA6595 Flyback Tranformer

for TI TPS23753A PoE Interface and Converter Controller

Developed for Texas Instruments TPS23753A IEEE802.3 PoE Interface and Converter Controller
Shown on TI PMP9068 Class 1 Isolated Synchronous Flyback Converter for PoE PD Application Reference Design

立即购买:

计数	单价
1	$3.82
350	$3.28
700	$1.98
1400	$1.54
2800	$1.32
5000	$1.21

对于大批量采购或非库存产品，点击这里请求报价。

Packaging

D = 13" machine-ready reel

. 现货，可今天发货.

索取样品:

典型应用

与Texas Instruments TPS23753A一起使用

输入电压	输出 1		Fsw
输入电压	Sec	Bias	Fsw
36 V — 57 V	3.3 V , 0.9 A	12 V , 0.02 A	250 kHz

规格

零件号 2 (Hover for schematics)	0A时的电感 (µH) 3 (公差: ±10%)	最小电感 0.3 A (µH) 4	DCR max (Ω) 5				最大漏电感 (µH) 6	匝数比	隔离电压 (Vrms) 7
零件号 2 (Hover for schematics)	0A时的电感 (µH) 3 (公差: ±10%)	最小电感 0.3 A (µH) 4	Pri	Sec	Drive	Bias	最大漏电感 (µH) 6	Pri : Sec : Drive : Bias	隔离电压 (Vrms) 7
PA6595-AL_	310	279	1.140	0.025	0.282	1.580	4.10	1 : 0.14 : 0.21 : 0.465	1500

注释

Output is of the secondary winding. Output of the bias winding is 12 V, 20 mA.
When ordering, please specify packaging code: e.g. PA6595-ALD
Inductance tested at 250 kHz, 0.1 Vrms, 0 Adc
Peak primary current drawn at minimum input voltage
DCR measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Leakage inductance for the primary is with the secondary and drive windings shorted; leakage inductance for the drive winding is with the secondary windings shorted.
1500 Vrms, one minute isolation, primary and bias to secondary and drive.

端子:

RoHS-compliant. 260°C compatible. Tin-silver-copper over tin over nickel over phos bronze terminations.

包装:

D = 13″ machine ready reel. EIA-481 embossed plastic tape (350 per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

环境

环境:

符合RoHS

环境温度范围:

–40°C to +125°C

储存温度范围:

Component: –40°C to +135°C
Tape and reel packaging: –40°C to +80°C

最高元件温度:

+135°C

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

原理图

物理特性

卷装规格

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
350	330	100	13	38,4	32,4	32	20	4	2	9,35	0,45

一般规格

核心材料:

Ferrite

重量:

2.1 g

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

仓库

语言设定

货币设定