站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

ZA9704-AL No-Opto Flyback Transformer

for PMP30750 by Texas Instruments

符合RoHS AEC-Q flag
  • Optimized for PMP30750 3.5 W automotive dual-output PSR flyback regulator by Texas Instruments
  • Designed for 150 kHz with 6 – 36 V input voltage
  • 2200 Vrms, one minute isolation (hipot) between primary and secondary windings
  • AEC-Q200 qualified

立即购买:

很抱歉,目前我们的网上商店不提供所选元件。

请点击“请求报价”联系支持部门,以获取自定义报价或了解更多信息。

. 现货,可今天发货.
索取样品:

典型应用

与Texas Instruments PMP30750一起使用

输出 1 功率 Fsw
Sec1 Sec2
17.5 V , 0.1 A 17.5 V , 0.1 A 3.5 W 150 kHz

规格

Electrical specifications at 25°C.

零件号
(Hover for schematics)
0A时的
电感 (µH) 2
(公差: ±10%)
Isat (A) 3 DCR max 最大
漏电感
(µH) 4
匝数比 隔离
电压 (Vrms) 5
Pri (Ω) Sec1 (Ω) Sec2 (Ω) Pri : Sec1 : Sec2
ZA9704-ALD 33 2.0 0.135 0.604 0.604 0.43 1 : 1 : 1 2200
注释
  1. Both secondary outputs (Sec1 and Sec2) are at 17.5 V, 0.10 A.
  2. Inductance is for the primary, measured at 150 kHz, 0.1 Vrms, 0 Adc.
  3. Isat: DC current that causes the primary inductance to drop 30% from its value without current.
  4. Leakage Inductance is for the primary, measured with secondary windings shorted together.
  5. 2200 Vrms / 3111 VDC , one minute isolation (hipot) between primary and secondary windings.

端子:

  • RoHS tin-silver-copper over tin over nickel over phos bronze.

包装:

  • D = 13" machine-ready reel
    EIA 481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
环境
环境:
符合RoHS
环境温度范围:
−40°C to +125°C
储存温度范围:
Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C
最高元件温度:
+165°C (Ambient + temperature rise)
故障率(FIT)/平均故障间隔时间(MTBF):

性能曲线

L vs Current

原理图

za9704s.gif





 

物理特性

za9704d.gif

dims_inches_mm.gif

卷装规格

tapereel_pl.gif
 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_u.gif
500 330 100 13 30,4 24,4 24 16 4 2 6,13 0,36

一般规格

核心材料:
Ferrite
重量:
1.2 − 1.4 g
包装:
500/13″ reel Plastic tape: 24 mm wide, 0.36 mm thick, 16 mm pocket spacing, 6.13 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles.
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品系列