사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
Inductors Explained by Coilcraft & Mouser
XGL4020 Ultra-low DCR Power Inductors

ZF3205-AE LLC Half-Bridge Transformers

for AHV85312 eval board by Allegro MicroSystems

RoHS 준수 할로겐 프리 AEC-Q flag
The ZF3205-AE is an automotive grade transformer designed for EV and HEV power electronics. It features low interwinding capacitance to minimize EMI and deliver exceptionally high Common Mode Transient Immunity (CMTI), making it ideal for On-Board Chargers (OBCs), DC-DC converters, and traction inverter applications. Designed for reliability in high power environments and fully AEC-Q200 qualified, it ensures robust performance under the rigorous electrical, thermal, and vibration conditions required in modern electric vehicle systems.
  • Optimized for AHV85312 eval board by Allegro MicroSystems
  • Low interwinding capacitance to minimize EMI and achieve high CMTI
  • Ideal for automotive OBC and traction Inverters in EV/HEV
  • AEC-Q200 qualified

지금 구매:
개수 단품 가격
1 $3.95
100 $3.23
400 $2.42
800 $1.46
1000 $1.14

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

사양

Electrical specifications at 25°C.

부품 번호 1
(Hover for schematics)
인덕턴스
@ 0A (µH) 2
(허용 오차: ±25%)
DCR max 3 Leakage
Inductance
±20% (µH) 4
권수비 정전용량
max (pF) 5
절연
전압 (Vrms) 6
Pri (Ω) Sec (Ω) Pri : Sec
ZF3205-AEC 20 0.18 0.30 2 1 : 1.7 0.6 3535
메모
  1. When ordering, please specify packaging code: e.g. ZF3205-AEC
  2. Inductance measured at 1 MHz, 0.1 Vrms, 0 ADC on an Agilent 4263B (or equivalent).
  3. DCR is measured on a Keithley 580 Micro-ohmmeter (or equivalent).
  4. Leakage Inductance LL is measured at 1 MHz, 0.1 Vrms with pins 3 and 4 shorted.
  5. Interwinding capacitance is measured at 250 kHz, 0.1 Vrms across pins 1 – 4 with pins 2 and 3 open.
  6. 5000 VDC / 3535 Vrms, one minute isolation (hipot) measured between primary and secondary.
Designed per IEC 61558-1 to meet the following requirements. Please contact [email protected] for questions about suitability for use in other application conditions.
 
Reinforced insulation example Basic insulation example
Working voltage 400 V Working voltage 800 V
Altitude 2500 m Altitude 2500 m
Overvoltage category II Overvoltage category II
Pollution degree 2 Pollution degree 2

5.9 mm creepage and clearance between primary and secondary windings with Material Group IIIa.
 

종단 처리:

  • RoHS compliant tin over nickel over silver glass frit.

패키지:

  • C = 7" machine-ready reel
    EIA 481 embossed plastic tape (400 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • D = 13" machine-ready reel
    EIA 481 embossed plastic tape. Factory order only, not stocked (1200 parts per full reel).
환경
환경:
RoHS 준수 , 할로겐 프리
주변 온도 범위:
−40°C to +125°C
보관 온도 범위:
Component: −40°C to +140°C
Tape and reel packaging: −40°C to +80°C
최고 부품 온도:
+140°C
고장 비율(FIT) / 평균 고장률(MTBF):

회로도


zf3205s.gif




 

물리적 특성

zf3205d.gif

dims_inches_mm.gif

테이프 및 릴 사양

tapereel_pl.gif
 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_cg.jpg
400 1200* 178/330 60/100 13 30,4 24,4 24 8 4 2 5,5 0,40
* Special order

일반 사양

코어 소재:
Ferrite
중량:
0.53 − 0.54 g
패키지:
400/7" reel; 1200/13" reel Plastic tape: 24 mm wide, 0.4 mm thick, 8 mm pocket spacing, 5.5 mm pocket depth

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles.
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

관련 제품 시리즈