사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
Inductors Explained by Coilcraft & Mouser
XGL4020 Ultra-low DCR Power Inductors

ZB1347

Isolated Buck Transformer

RoHS 준수 할로겐 프리 AEC-Q flag
Engineered for high-frequency performance, the ZB1347-AE isolated buck transformer operates efficiently from 300 – 750 kHz with a 5 V input, delivering stable, low-noise power conversion for demanding systems. Its rugged magnetic construction ensures reliable isolated power for telecom servers, service robots, energy-storage systems, and other industrial applications. Fully AEC-Q200 qualified, it meets the reliability requirements for automotive and mission-critical designs. In addition to iso-buck operation, the design also supports Flyback topologies, providing flexibility for compact, high-efficiency power stages.
 
  • Designed for bidirectional disconnect board EVAL_BDPS_DD_TOLL from Infineon
  • Optimized for 300 – 750 kHz with 5 V input
  • Suitable for telecom servers, service robots, energy storage and similar industrial applications
  • AEC-Q200 qualified
  • Versatile design also provides for use in Flyback topologies

통상적인 적용 분야

Infineon EVAL_BDPS_ DD_TOLL와(과) 호환

입력 전압 출력 1 전력 FSW
5 V 12 V , 0.2 A 2.4 W 500 MHz

사양

Electrical specifications at 25°C.

Transformer

부품 번호 2
(Hover for schematics)
인덕턴스
@ 0A (µH) 3
(허용 오차: ±10%)
Isat (A) 4 DCR max 누설
인덕턴스
최대 (µH) 5
권수비 절연
전압 (Vrms) 6
Pri (Ω) Sec1 (Ω) Sec2 (Ω) Pri : Sec1 : Sec2
ZB1347-AED 135 1.5 0.268 3.6 2.9 0.60 1 : 2 : 2 1500
메모
  1. 12 V, 0.2 A output is for secondary 1 and secondary 2 windings.
  2. Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic tape (200 parts per reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  3. Inductance is for the primary, measured at 500 kHz, 0.1 Vrms, 0 Adc.
  4. DC current that causes the primary inductance drop 30% from its value without current.
  5. Leakage Inductance is for the primary, measured with secondary windings shorted together.
  6. 1500 Vrms, one minute isolation (hipot) from primary to secondary.

종단 처리:

  • RoHS tin-silver-copper over tin over nickel over phos bronze. Other terminations available at additional cost.

패키지:

  • D = 13" machine-ready reel
    EIA-481 embossed plastic tape (200 parts per reel). Quantities less than full reel available: in  tape (not machine ready) or with leader and trailer ($25 charge).
환경
환경:
RoHS 준수 , 할로겐 프리
주변 온도 범위:
−40°C to +125°C
보관 온도 범위:
Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C
최고 부품 온도:
+165°C (ambient + temp rise)
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

회로도

zb1347s-(1).gif


zb1347s_iso-buck-(1).gif




 

물리적 특성

zb1347d-(1).gif

dims_inches_mm.gif

테이프 및 릴 사양

tapereel_pl.gif
 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_f.jpg
200 330 100 13 38,4 32,4 32 24 4 2 11,2 0,5

일반 사양

코어 소재:
Ferrite
중량:
4.0 − 4.3 g
패키지:
200/13″ reel Plastic tape: 32 mm wide, 0.5 mm thick, 24 mm pocket spacing, 11.2 mm pocket depth

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

관련 제품 시리즈