Datasheet 3D Model

HA4000-AL Planar Transformer

for Texas Instruments LM5027

Developed for use with the TI LM5027 Voltage Mode Active Clamp Controller.
Chosen by NSC for T1 on the LM5027 Evaluation Board, and is described in Application Note AN‑1976.
Auxiliary winding provides 10 V to the chipset.

立即购买:

计数	单价
1	$7.69
1000	$7.46
5000	$6.79

对于大批量采购或非库存产品，点击这里请求报价。

Packaging

D = 13" machine-ready reel

. 现货，可今天发货.

索取样品:

典型应用

与Texas Instruments LM5027一起使用

输入电压	输出 1		功率	Fsw
输入电压	Sec	Aux	功率	Fsw
36 V — 78 V	3.3 V , 30 A	10 V , 0.065 A	99 W	200 kHz

规格

Electrical specifications at 25°C.

零件号 2 (Hover for schematics)	最小电感 (µH) 3	DCR max 4			最大漏电感 (µH) 5	匝数比	隔离电压 (Vrms) 6
零件号 2 (Hover for schematics)	最小电感 (µH) 3	Pri (mΩ)	Sec1 (mΩ)	Aux (mΩ)	最大漏电感 (µH) 5	Pri : Sec1 : Sec2 : Aux	隔离电压 (Vrms) 6
HA4000-ALD	270	56	0.5	294	0.6	1 : 0.083 : 0.083 : 0.583	1500

注释

Output is with the secondary windings connected in series. Bias winding output is 10 V, 65 mA.
When ordering, please specify a packaging code: HA4000-ALD.
Inductance is for the primary, measured across pins 2 and 4 at 200 kHz, 0.1 Vrms, 0 Adc.
DCR for the primary is measured from pin 2 to pin 4. DCR for the secondary is for each winding.
Leakage inductance is for the full primary and is measured with the secondary shorted.
1500 Vdc isolation, primary and auxiliary to secondaries.

端子:

RoHS-compliant. 260°C compatible. Matte tin over nickel over brass terminations.

包装:

D = 13″ machine ready reel. EIA-481 embossed plastic tape (200 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

环境

环境:

符合RoHS

环境温度范围:

–40°C to +85°C

储存温度范围:

Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

原理图

物理特性

卷装规格

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
200	330	100	13	50,4	44,4	44	32	4	2	9,35	0,37

一般规格

核心材料:

Ferrite

重量:

11.9 g

包装:

200/13″ reel Plastic tape: 44 mm wide, 0.37 mm thick, 32 mm pocket spacing, 9.35 mm pocket depth

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Only pure water or alcohol recommended

HA4000-AL Planar Transformer

for Texas Instruments LM5027

典型应用

规格

端子:

包装:

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

Magnetics

B0860-CL Planar Transformer

C1539-AL Planar Transformer

DA2025-AL Planar Transformer

HA3648-BL Planar Transformer

JA4309 Planar Transformer

Magnetics for

B0853-AL SMT Planar Transformer

A9786-AL Planar Magnetics

MA5519-AL Planar Transformer

NA5738-DL SMT Planar Transformer

NA5871-AL 800 W Planar Transformer

PA6605-AL Planar Transformer

PL140 Series

PL160 Series

PL300 Series

RA6992-BL SMT Planar Transformer

RA6998 Forward Mode Planar Transformer

RA6999-AL Forward Mode Transformer

RA7040-AL Forward Mode

YA9215-AL 50 W Resonant Transformer

仓库

语言设定

货币设定

HA4000-AL Planar Transformer

for Texas Instruments LM5027

所选配置不可用

典型应用

规格

端子:

包装:

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

Magnetics

B0860-CL Planar Transformer

C1539-AL Planar Transformer

DA2025-AL Planar Transformer

HA3648-BL Planar Transformer

JA4309 Planar Transformer

Magnetics for

B0853-AL SMT Planar Transformer

A9786-AL Planar Magnetics

MA5519-AL Planar Transformer

NA5738-DL SMT Planar Transformer

NA5871-AL 800 W Planar Transformer

PA6605-AL Planar Transformer

PL140 Series

PL160 Series

PL300 Series

RA6992-BL SMT Planar Transformer

RA6998 Forward Mode Planar Transformer

RA6999-AL Forward Mode Transformer

RA7040-AL Forward Mode

YA9215-AL 50 W Resonant Transformer

警告