サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
Inductors Explained by Coilcraft & Mouser
XGL4020 Ultra-low DCR Power Inductors

ZF3205-AE LLC Half-Bridge Transformers

for AHV85312 eval board by Allegro MicroSystems

RoHS準拠 ハロゲンフリー AEC-Q flag
The ZF3205-AE is an automotive grade transformer designed for EV and HEV power electronics. It features low interwinding capacitance to minimize EMI and deliver exceptionally high Common Mode Transient Immunity (CMTI), making it ideal for On-Board Chargers (OBCs), DC-DC converters, and traction inverter applications. Designed for reliability in high power environments and fully AEC-Q200 qualified, it ensures robust performance under the rigorous electrical, thermal, and vibration conditions required in modern electric vehicle systems.
  • Optimized for AHV85312 eval board by Allegro MicroSystems
  • Low interwinding capacitance to minimize EMI and achieve high CMTI
  • Ideal for automotive OBC and traction Inverters in EV/HEV
  • AEC-Q200 qualified

今すぐ購入:
個数 単価
1 $3.95
100 $3.23
400 $2.42
800 $1.46
1000 $1.14

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:

仕様

Electrical specifications at 25°C.

部品番号 1
(Hover for schematics)
インダクタンス
@0A (µH) 2
(公差: ±25%)
DCR max 3 Leakage
Inductance
±20% (µH) 4
巻数比 キャパシタンス
max (pF) 5
絶縁
電圧 (Vrms) 6
Pri (Ω) Sec (Ω) Pri : Sec
ZF3205-AEC 20 0.18 0.30 2 1 : 1.7 0.6 3535
メモ
  1. When ordering, please specify packaging code: e.g. ZF3205-AEC
  2. Inductance measured at 1 MHz, 0.1 Vrms, 0 ADC on an Agilent 4263B (or equivalent).
  3. DCR is measured on a Keithley 580 Micro-ohmmeter (or equivalent).
  4. Leakage Inductance LL is measured at 1 MHz, 0.1 Vrms with pins 3 and 4 shorted.
  5. Interwinding capacitance is measured at 250 kHz, 0.1 Vrms across pins 1 – 4 with pins 2 and 3 open.
  6. 5000 VDC / 3535 Vrms, one minute isolation (hipot) measured between primary and secondary.
Designed per IEC 61558-1 to meet the following requirements. Please contact [email protected] for questions about suitability for use in other application conditions.
 
Reinforced insulation example Basic insulation example
Working voltage 400 V Working voltage 800 V
Altitude 2500 m Altitude 2500 m
Overvoltage category II Overvoltage category II
Pollution degree 2 Pollution degree 2

5.9 mm creepage and clearance between primary and secondary windings with Material Group IIIa.
 

終端処理:

  • RoHS compliant tin over nickel over silver glass frit.

パッケージ:

  • C = 7" machine-ready reel
    EIA 481 embossed plastic tape (400 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • D = 13" machine-ready reel
    EIA 481 embossed plastic tape. Factory order only, not stocked (1200 parts per full reel).
環境
環境:
RoHS準拠 , ハロゲンフリー
周囲温度範囲:
−40°C to +125°C
保管温度範囲:
Component: −40°C to +140°C
Tape and reel packaging: −40°C to +80°C
最大部品温度:
+140°C
時間内の障害(FIT)/平均障害間隔(MTBF):

回路図


zf3205s.gif




 

物理的特徴

zf3205d.gif

dims_inches_mm.gif

テープ&リール仕様

tapereel_pl.gif
 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_cg.jpg
400 1200* 178/330 60/100 13 30,4 24,4 24 8 4 2 5,5 0,40
* Special order

一般仕様

コア材料:
Ferrite
重量:
0.53 − 0.54 g
パッケージ:
400/7" reel; 1200/13" reel Plastic tape: 24 mm wide, 0.4 mm thick, 8 mm pocket spacing, 5.5 mm pocket depth

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles.
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

関連製品シリーズ