サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
Inductors Explained by Coilcraft & Mouser
XGL4020 Ultra-low DCR Power Inductors

ZA9704-AL No-Opto Flyback Transformer

for PMP30750 by Texas Instruments

RoHS準拠 AEC-Q flag
  • Optimized for PMP30750 3.5 W automotive dual-output PSR flyback regulator by Texas Instruments
  • Designed for 150 kHz with 6 – 36 V input voltage
  • 2200 Vrms, one minute isolation (hipot) between primary and secondary windings
  • AEC-Q200 qualified

今すぐ購入:

The part number you have selected is not available through our online store.

Please click the "Request Quote" button for pricing and more information.

. 在庫あり、即日出荷可能.
サンプルを依頼:

一般的な用途

Texas Instruments PMP30750に対応

出力 1 電力 Fsw
Sec1 Sec2
17.5 V , 0.1 A 17.5 V , 0.1 A 3.5 W 150 kHz

仕様

Electrical specifications at 25°C.

部品番号
(Hover for schematics)
インダクタンス
@0A (µH) 2
(公差: ±10%)
Isat (A) 3 DCR max 漏れ
インダクタンス
最大 (µH) 4
巻数比 絶縁
電圧 (Vrms) 5
Pri (Ω) Sec1 (Ω) Sec2 (Ω) Pri : Sec1 : Sec2
ZA9704-ALD 33 2.0 0.135 0.604 0.604 0.43 1 : 1 : 1 2200
メモ
  1. Both secondary outputs (Sec1 and Sec2) are at 17.5 V, 0.10 A.
  2. Inductance is for the primary, measured at 150 kHz, 0.1 Vrms, 0 Adc.
  3. Isat: DC current that causes the primary inductance to drop 30% from its value without current.
  4. Leakage Inductance is for the primary, measured with secondary windings shorted together.
  5. 2200 Vrms / 3111 VDC , one minute isolation (hipot) between primary and secondary windings.

終端処理:

  • RoHS tin-silver-copper over tin over nickel over phos bronze.

パッケージ:

  • D = 13" machine-ready reel
    EIA 481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
環境
環境:
RoHS準拠
周囲温度範囲:
−40°C to +125°C
保管温度範囲:
Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C
最大部品温度:
+165°C (Ambient + temperature rise)
時間内の障害(FIT)/平均障害間隔(MTBF):

性能曲線

L vs Current

回路図

za9704s.gif





 

物理的特徴

za9704d.gif

dims_inches_mm.gif

テープ&リール仕様

tapereel_pl.gif
 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_u.gif
500 330 100 13 30,4 24,4 24 16 4 2 6,13 0,36

一般仕様

コア材料:
Ferrite
重量:
1.2 − 1.4 g
パッケージ:
500/13″ reel Plastic tape: 24 mm wide, 0.36 mm thick, 16 mm pocket spacing, 6.13 mm pocket depth

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles.
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

関連製品シリーズ