サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

LPD8035V Series

High-Isolation Miniature Coupled Inductors

RoHS準拠 ハロゲンフリー AEC-Q flag
Coilcraft LPD8035V Series surface-mount 1:1 coupled power inductors feature higher isolation and are suitable for Flyback, SEPIC, Cuk, Zeta and other applications. Their compact, low-profile design and magnetic shielding make them ideal for high-density circuits.
  • 1500 Vrms, one minute isolation (hipot) between windings
  • Provides functional insulation
  • Low-profile design with smaller footprint than MSD Family
  • Ideal for Flyback, Fly-buckTM, SEPIC, Ćuk, Zeta and other applications
  • Magnetically shielded to minimize EMI
  • AEC-Q200 Grade 3 (−40°C to +85°C) with a 125°C max part temperature

LPD8035V-333: Designed in TI’s LM5160 and LM5017 Fly-Buck™ reference designs:  
PMP15005 and PMP15006

Learn more about TI’s Multi-Output Fly-Buck Regulator  from this article on How2Power.com

Learn more about  Fly-Buck TM Coupled Inductors
 


今すぐ購入:
個数 単価
1 $4.29
100 $4.21
350 $3.16
700 $1.90
1400 $1.46
2800 $1.26
5000 $1.14

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:

仕様

Electrical specifications at 25°C.

フライバック用途

部品番号 1
(Hover for schematics)
インダクタンス (µH) 2
(公差: ±20%)
DCR (Ω) 3 絶縁
電圧 (V) 4
漏れ
インダクタンス (nH) 6
巻数比
typ max
LPD8035V-472MR_ 4.7 0.12 0.14 1500 150 1 : 1
LPD8035V-562MR_ 5.6 0.13 0.15 1500 180 1 : 1
LPD8035V-822MR_ 8.2 0.16 0.19 1500 210 1 : 1
LPD8035V-103MR_ 10 0.17 0.19 1500 250 1 : 1
LPD8035V-223MR_ 22 0.33 0.36 1500 305 1 : 1
LPD8035V-333MR_ 33 0.62 0.66 1500 350 1 : 1
LPD8035V-473MR_ 47 0.67 0.70 1500 410 1 : 1
LPD8035V-563MR_ 56 0.75 0.78 1500 440 1 : 1
LPD8035V-683MR_ 68 0.85 0.89 1500 475 1 : 1
LPD8035V-823MR_ 82 0.95 0.98 1500 510 1 : 1
LPD8035V-104MR_ 100 1.3 1.5 1500 565 1 : 1
LPD8035V-124MR_ 120 1.6 1.7 1500 775 1 : 1
LPD8035V-154MR_ 150 1.8 1.9 1500 820 1 : 1

SEPIC用途

部品番号 1
(Hover for schematics)
インダクタンス (µH) 2
(公差: ±20%)
DCR (Ω) 3 SRF typ (MHz) 5 結合係数 漏れ
インダクタンス (nH) 6
Isat (A) 7 Irms (A)
typ max 両方の巻線 8 単一巻線 9
LPD8035V-472MR_ 4.7 0.12 0.14 45.6 0.97 150 2.7 1.2 1.6
LPD8035V-562MR_ 5.6 0.13 0.15 41.4 0.97 180 2.5 1.0 1.5
LPD8035V-822MR_ 8.2 0.16 0.19 31.1 0.97 210 2.0 0.95 1.4
LPD8035V-103MR_ 10 0.17 0.19 28.8 0.98 250 2.0 0.92 1.3
LPD8035V-223MR_ 22 0.33 0.36 18.0 0.98 305 1.3 0.63 0.89
LPD8035V-333MR_ 33 0.62 0.66 13.2 0.99 350 1.0 0.52 0.73
LPD8035V-473MR_ 47 0.67 0.70 12.4 0.99 410 0.54 0.47 0.67
LPD8035V-563MR_ 56 0.75 0.78 11.5 0.99 440 0.49 0.42 0.60
LPD8035V-683MR_ 68 0.85 0.89 10.9 0.99 475 0.45 0.40 0.57
LPD8035V-823MR_ 82 0.95 0.98 10.0 0.99 510 0.42 0.38 0.54
LPD8035V-104MR_ 100 1.3 1.5 9.6 0.99 565 0.39 0.31 0.44
LPD8035V-124MR_ 120 1.6 1.7 8.7 0.99 775 0.35 0.30 0.42
LPD8035V-154MR_ 150 1.8 1.9 7.6 0.99 820 0.31 0.28 0.39
メモ
  1. When ordering, please specify packaging code: e.g. LPD8035V-154MEC
  2. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
    For SEPIC: When leads are connected in parallel, inductance is the same value. When leads are connected in series, inductance is four times the value
  3. DCR is for each winding. DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
    For SEPIC: When leads are connected in parallel, DCR is half the value. When leads are connected in series, DCR is twice the value.
  4. Designed to provide Functional Insulation only; does not protect against electrical shock; nor intended for the isolation of SELV circuits from Hazardous Voltage circuits measured from primary to secondary for one minute.
  5. SRF measured using an Agilent/HP 4191A or equivalent. When leads are connected in parallel, SRF is the same value.
  6. Leakage inductance is for L1 and is measured with L2 shorted.
  7. Isat: DC current, at which the inductance drops 30% (typ) from its value without current. It is the sum of the current flowing in both windings.
  8. Irms, both windings: Equal current when applied to each winding simultaneously that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Determine temperature rise.
  9. Irms, one winding: Current when applied to one winding that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Determine temperature rise.

終端処理:

  • RoHS compliant matte tin over nickel over silver.

パッケージ:

  • C = 7″ machine-ready reel. EIA-481 embossed plastic tape (350 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1500 parts per full reel).
環境
環境:
RoHS準拠 , ハロゲンフリー
周囲温度範囲:
−40°C to +85°C with Irms current
保管温度範囲:
Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C
最大部品温度:
+125°C (Ambient + temperature rise)
時間内の障害(FIT)/平均障害間隔(MTBF):

性能曲線

Inductance vs Current

Inductance vs Frequency

回路図

lpd8035vschem.gif
lpd4012s.gif

物理的特徴

lpd8035vd.gif
dims_inches_mm.gif

テープ&リール仕様

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_aj.gif
350 1500* 178/330 60/100 13 18,4 12,4 16 12 4 2 3,68 0,35

一般仕様

コア材料:
Ferrite
重量:
210 – 225 mg
パッケージ:
350/7″ reel; 1500/13″ reel Plastic tape: 16 mm wide, 0.35 mm thick, 12 mm pocket spacing, 3.68 mm pocket depth

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
推奨ピック&プレースノズル:
OD: 6.2 mm; ID: ≤ 3.1 mm
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.