サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

MSD1260 Series

Shielded Coupled Power Inductors

RoHS準拠 AEC-Q flag

Coilcraft's MSD1260 Series of 1:1 coupled power inductors feature magnetic shielding for compact packaging and tight winding-to-winding coupling. They are ideal for Flyback, SEPIC, Ćuk, Zeta and other applications.

  • Ideal for Flyback, SEPIC, Ćuk, Zeta and other applications
  • Magnetic shielding allows high-density mounting
  • Tight winding coupling
  • Industry standard footprint
  • AEC-Q200 Grade 3 (−40°C to +85°C)
See Selecting inductors for SEPIC (move to resources)

今すぐ購入:
個数 単価
1 $2.68
250 $1.74
500 $1.05
1000 $0.81
2500 $0.70
5000 $0.64

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:

仕様

Electrical specifications at 25°C.

フライバック用途

部品番号 1
(Hover for schematics)
インダクタンス (µH) 2 公差 (%) DCR max (Ω) 3 絶縁
電圧 (V)
漏れ
インダクタンス (µH) 5
巻数比
MSD1260-472ML_ 4.7 20 0.036 500 0.20 1 : 1
MSD1260-562ML_ 5.6 20 0.040 500 0.20 1 : 1
MSD1260-682ML_ 6.8 20 0.048 500 0.24 1 : 1
MSD1260-822ML_ 8.2 20 0.052 500 0.25 1 : 1
MSD1260-103ML_ 10 20 0.060 500 0.26 1 : 1
MSD1260-123ML_ 12 20 0.074 500 0.28 1 : 1
MSD1260-153ML_ 15 20 0.085 500 0.32 1 : 1
MSD1260-183ML_ 18 20 0.097 500 0.40 1 : 1
MSD1260-223ML_ 22 20 0.12 500 0.68 1 : 1
MSD1260-273ML_ 27 20 0.12 500 0.50 1 : 1
MSD1260-333ML_ 33 20 0.13 500 0.65 1 : 1
MSD1260-393ML_ 39 20 0.14 500 1.1 1 : 1
MSD1260-473ML_ 47 20 0.17 500 0.80 1 : 1
MSD1260-563ML_ 56 20 0.20 500 0.75 1 : 1
MSD1260-683ML_ 68 20 0.22 500 0.57 1 : 1
MSD1260-823ML_ 82 20 0.27 500 1.5 1 : 1
MSD1260-104ML_ 100 20 0.32 500 1.4 1 : 1
MSD1260-124KL_ 120 10 0.42 500 1.3 1 : 1
MSD1260-154KL_ 150 10 0.48 500 1.5 1 : 1
MSD1260-184KL_ 180 10 0.54 500 1.8 1 : 1
MSD1260-224KL_ 220 10 0.69 500 1.6 1 : 1
MSD1260-274KL_ 270 10 0.81 500 2.2 1 : 1
MSD1260-334KL_ 330 10 1.1 500 2.4 1 : 1
MSD1260-394KL_ 390 10 1.2 500 3.7 1 : 1
MSD1260-474KL_ 470 10 1.6 500 2.9 1 : 1
MSD1260-564KL_ 560 10 1.8 500 2.6 1 : 1
MSD1260-684KL_ 680 10 2.1 500 5.8 1 : 1
MSD1260-824KL_ 820 10 2.7 500 2.9 1 : 1
MSD1260-105KL_ 1000 10 3.1 500 4.3 1 : 1

SEPIC用途

部品番号 1
(Hover for schematics)
インダクタンス (µH) 2 公差 (%) DCR max (Ω) 3 SRF typ (MHz) 4 結合係数 漏れ
インダクタンス (µH) 5
Isat (A) 6 Irms (A)
両方の巻線 7 単一巻線 8
MSD1260-472ML_ 4.7 20 0.036 32.0 0.98 0.20 10.3 3.2 4.5
MSD1260-562ML_ 5.6 20 0.040 31.0 0.98 0.20 9.7 3.0 4.2
MSD1260-682ML_ 6.8 20 0.048 28.0 0.98 0.24 9.2 2.8 3.9
MSD1260-822ML_ 8.2 20 0.052 25.0 0.98 0.25 8.6 2.6 3.7
MSD1260-103ML_ 10 20 0.060 22.0 0.99 0.26 7.4 2.5 3.5
MSD1260-123ML_ 12 20 0.074 21.0 0.99 0.28 6.9 2.2 3.1
MSD1260-153ML_ 15 20 0.085 17.6 0.99 0.32 6.1 2.1 2.9
MSD1260-183ML_ 18 20 0.097 17.0 0.99 0.40 5.3 1.9 2.7
MSD1260-223ML_ 22 20 0.12 15.0 0.98 0.68 5.0 1.8 2.5
MSD1260-273ML_ 27 20 0.12 13.6 0.99 0.50 4.7 1.7 2.4
MSD1260-333ML_ 33 20 0.13 12.7 0.99 0.65 4.2 1.6 2.3
MSD1260-393ML_ 39 20 0.14 11.7 0.99 1.1 3.8 1.6 2.3
MSD1260-473ML_ 47 20 0.17 8.7 0.99 0.80 3.3 1.4 2.0
MSD1260-563ML_ 56 20 0.20 7.6 0.99 0.75 3.1 1.4 1.9
MSD1260-683ML_ 68 20 0.22 6.1 >0.99 0.57 2.8 1.3 1.8
MSD1260-823ML_ 82 20 0.27 5.3 0.99 1.5 2.6 1.2 1.6
MSD1260-104ML_ 100 20 0.32 5.0 0.99 1.4 2.2 1.1 1.5
MSD1260-124KL_ 120 10 0.42 4.4 0.99 1.3 2.1 0.93 1.3
MSD1260-154KL_ 150 10 0.48 4.0 0.99 1.5 1.8 0.87 1.2
MSD1260-184KL_ 180 10 0.54 3.6 0.99 1.8 1.6 0.82 1.2
MSD1260-224KL_ 220 10 0.69 3.2 >0.99 1.6 1.5 0.72 1.0
MSD1260-274KL_ 270 10 0.81 2.8 >0.99 2.2 1.4 0.67 0.95
MSD1260-334KL_ 330 10 1.1 2.5 >0.99 2.4 1.3 0.57 0.81
MSD1260-394KL_ 390 10 1.2 2.3 >0.99 3.7 1.2 0.55 0.77
MSD1260-474KL_ 470 10 1.6 2.1 >0.99 2.9 1.0 0.48 0.67
MSD1260-564KL_ 560 10 1.8 2.0 >0.99 2.6 0.95 0.45 0.63
MSD1260-684KL_ 680 10 2.1 1.8 >0.99 5.8 0.88 0.42 0.59
MSD1260-824KL_ 820 10 2.7 1.5 >0.99 2.9 0.79 0.37 0.52
MSD1260-105KL_ 1000 10 3.1 1.2 >0.99 4.3 0.69 0.34 0.49
メモ
  1. When ordering, please specify termination and packaging codes: e.g. MSD1260-105KLD
  2. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent. When leads are connected in parallel, inductance is the same value. When leads are connected in series, inductance is four times the value.
  3. DCR is for each winding. When leads are connected in parallel, DCR is half the value. When leads are connected in series, DCR is twice the value.
  4. SRF measured using an Agilent/HP 4191A or equivalent. When leads are connected in parallel, SRF is the same value.
  5. Leakage Inductance is for L1 and is measured with L2 shorted. 
  6. Isat: DC current, at which the inductance drops 30% (typ) from its value without current. It is the sum of the current flowing in both windings.
  7. Irms, both windings: Equal current when applied to each winding simultaneously that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Determine temperature rise.
  8. Irms, one winding: Current when applied to one winding that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.  Determine temperature rise.

終端処理:

  • L = RoHS compliant matte tin over nickel over phos bronze.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
  • S = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

  • 13" reel, machine-ready
    EIA-481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel
    Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
環境
環境:
RoHS準拠
周囲温度範囲:
–40°C to +85°C with (40°C rise) Irms current.
保管温度範囲:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
最大部品温度:
+125°C (ambient + temp rise).
時間内の障害(FIT)/平均障害間隔(MTBF):

性能曲線

Inductance vs. Current

Inductance vs. Frequency

回路図

msd1260schem.gif

物理的特徴

msd1260d.gif
 

テープ&リール仕様

tapereel_pl-(23).gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_ak-(1).gif
500 330 100 13 30,4 24,4 24 16 4 2 6,9 0,5
 

一般仕様

コア材料:
Ferrite
重量:
2.8 – 3.2 g
パッケージ:
500/13″ reel; Plastic tape: 24 mm wide, 0.5 mm thick, 16 mm pocket spacing, 6.9 mm pocket depth
Winding to Winding Isolation:
500 Vrms, one minute

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info