View:
Einführung
Technische Daten
Umwelt/Umgebung
Kennlinien
Pläne/Diagramme
Physikalische Eigenschaften
Gurt/Rolle
Löten/Reinigen

Datasheet

CSX7045-200

Für weitere Informationen und Spezifikationen zum Bauteil.

Gehe zu Baureihe

Jetzt kaufen:

Muster anfordern:

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1 (Hover for schematics)	Induktivität min (mH) 2	DCR max 3		Windungsverhältnis	Volt-Zeit- Produkt (V-µs) 4	Frequenz (kHz)	Strom (A) 5	Abschluss- widerstand R_T (Ω) 6	Isolations- spannung (Vrms) 7
Teilenummer 1 (Hover for schematics)	Induktivität min (mH) 2	Pri (mΩ)	Sec (Ω)	Pri : Sec	Volt-Zeit- Produkt (V-µs) 4	Frequenz (kHz)	Strom (A) 5	Abschluss- widerstand R_T (Ω) 6	Isolations- spannung (Vrms) 7
CSX7045-200RC	6,93	0,5	17,3	1 : 200	207	6 — >800	20,0	10,0	1800

Hinweise

When ordering, please specify packaging code: e.g. CSX7045-250RC
Inductance is measured at 100 kHz, 0.1 Vrms, 0 ADC on an Agilent 4263B (or equivalent) with a Coilcraft CCF1546 test fixture.
DCR is measured on a Keithley 580 Micro-ohmmeter (or equivalent).
Volt-time product is for the secondary, between pins 3 and 4.
Primary current that causes a 40°C rise from 125°C.
Terminating resistance (R_T) value is based on 1 Volt output with 20 Amps flowing through the primary. Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation:
R_T (Ohms) = V_out × N_sec / I_in.
1800 Vrms, one minute isolation (hipot) between primary and secondary.

Anschlüsse:

RoHS compliant tin over nickel over silver glass frit (primary). RoHS compliant tin over nickel over copper (secondary).

Verpackung:

C = 7" machine-ready reel
EIA-481 embossed plastic tape (350 parts per full reel).
Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13" machine-ready reel
EIA-481 embossed plastic tape. Factory order only, not stocked (1500 parts per full reel).

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform , Halogenfrei

Umgebungstemperaturbereich:

–40°C to +125°C

Lagertemperaturbereich:

Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C

Maximale Bauteiltemperatur:

+165°C (ambient + temp rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Temperature Rise vs Current

Pläne/Diagramme

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
350	1500*	178/300	60/100	13	22,4	16,4	16	8	4	2	5,5	0,4

* Special order

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

500 – 550 mg

Verpackung:

350/7″ reel 1500/13″ reel Plastic tape: 16 mm wide, 0.4 mm thick, 8 mm pocket spacing, 5.5 mm pocket depth

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More Info.

CSX7045-200