Website-Einstellungen

Lager
Spracheinstellungen
Währungseinstellungen
Produkte
Informationsmaterial
Informationsmaterial
Video-Bibliothek
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

CST2010V Series

SMT Current Sense Transformers

RoHS-konform AEC-Q flag
  • High isolation voltage CST2010 current sense transformer
  • Sensed current up to 40 A
  • Designed for use up to 1 MHz and above
  • 2100 Vrms, one minute isolation (hipot) between windings
  • AEC-Q200 Grade 1 (−40°C to +125°C)
  • Designed to comply with IEC61558-1, IEC62369-1, and IEC60664-1 for providing Reinforced or Basic Insulation
    • 6.5 mm creepage and 2.5 mm clearance to meet reinforced insulation for working voltage up to 140 V and basic insulation for working voltage up to 500 V with material group 3, pollution degree P2, OVCII, and altitude up to 2 km.

Jetzt kaufen:

The part number you have selected is not available through our online store.

Please click the "Request Quote" button for pricing and more information.

. Auf Lager, noch heute versandbereit.
Muster anfordern:

Technische Daten

Electrical specifications at 25°C.

Teilenummer
(Hover for schematics)
Induktivität
bei 0A (mH) 1
(Toleranz: ±30%)
DCR max (Ω) 2 Windungsverhältnis Volt-Zeit-
Produkt (V-µs) 3
Frequenz (kHz) 4 Strom (A) 5 Abschluss-
widerstand RT (Ω) 6
Isolations-
spannung (Vrms) 7
Pri Sec Pri : Sec
CST2010V-150LD 19 0,00036 3,6 1 : 150 381 1 >1000 40 3,8 2100
Hinweise
  1. Inductance measured between secondary pins at 1 kHz, 0.1 Vrms, 0 Adc.
  2. DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  3. Volt-time product is for the secondary, between pin 2 and 4.
  4. For specific questions regarding frequency range, please contact us at [email protected]
  5. Primary current of 40 A causes approximately 40°C temperature rise from 25°C ambient. Higher current causes a greater temperature rise (see Temperature Rise vs Current curve).
  6. Terminating resistance (RT) value is based on 1 Volt output with 40 Amps flowing through the primary. Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation:
    R= Vout × Nsec / Iin.
  7. 2100 Vrms, one minute isolation (hipot) winding to winding.

Anschlüsse:

  • RoHS compliant tin-silver over tin over nickel over phos bronze (pins 2-4);
    RoHS compliant matte tin over nickel over copper (pins 11-12)

Verpackung:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
Umwelt/Umgebung
Umwelt/Umgebung:
RoHS-konform
Umgebungstemperaturbereich:
–40°C to +125°C
Lagertemperaturbereich:
Component: –40°C to +165°C.
Tape and reel Packaging: –40°C to +80°C
Maximale Bauteiltemperatur:
+165°C (ambient + temp rise)
Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

Kennlinien

Pläne/Diagramme

cst2010schematic.gif

Physikalische Eigenschaften



dims_inches_mm.gif

Gurt/Rolle-Spezifikationen

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c.gif
250 330 100 13 38,4 32,4 32 20 4 2 11,2 0,5

Allgemeine Spezifikation

Kernmaterial:
Ferrite
Gewicht:
3.8 g
Verpackung:
250/13″ reel; Plastic tape: 32 mm wide, 0.5 mm thick, 20 mm pocket spacing, 11.2 mm pocket depth

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
Löttemperaturbeständigkeit:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.
Baugruppenreinigung:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More Info.

Verwandte Produktreihen