Datasheet 3D Model

CSX7030-175

Für weitere Informationen und Spezifikationen zum Bauteil.

Gehe zu Baureihe

Jetzt kaufen:

Muster anfordern:

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1 (Hover for schematics)	Induktivität min (mH) 2	DCR max		Windungsverhältnis	Volt-Zeit- Produkt (V-µs) 3	Frequenz (kHz)	Strom (A) 4	Abschluss- widerstand R_T (Ω) 5	Isolations- spannung (Vrms) 6
Teilenummer 1 (Hover for schematics)	Induktivität min (mH) 2	Pri (mΩ)	Sec (Ω)	Pri : Sec	Volt-Zeit- Produkt (V-µs) 3	Frequenz (kHz)	Strom (A) 4	Abschluss- widerstand R_T (Ω) 5	Isolations- spannung (Vrms) 6
CSX7030-175RC	5,1	0,52	17,76	1 : 175	120,75	7 — >1000	20,0	8,75	1000

Hinweise

When ordering, please specify packaging code: e.g. CSX7030-200RC
Inductance is measured at 100 kHz, 0.1 Vrms, 0 ADC.
Volt-time product is for the secondary, between pin 3 and 4.
Primary current of 20 A causes less than 40°C temperature rise from 25°C ambient. Higher current causes a greater temperature rise.
Terminating resistance (R_T) value is based on 1 Volt output with 20 Amps flowing through the primary. Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation:
R_T (Ohms) = V_out × N_sec / I_in.
1000 Vrms, one minute isolation (hipot) between primary and secondary.

RoHS compliant tin over nickel over silver glass frit.

C = 7" machine-ready reel
EIA-481 embossed plastic tape (500 parts per full reel).
Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13" machine-ready reel
EIA-481 embossed plastic tape. Factory order only, not stocked (2200 parts per full reel).

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform , Halogenfrei

Umgebungstemperaturbereich:

–40°C to +125°C

Lagertemperaturbereich:

Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C

Maximale Bauteiltemperatur:

+140°C (ambient + temp rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
500	2200	178/300	60/100	13	22,4	16,4	16	8	4	2	3,5	0,4

Kernmaterial:

Ferrite

Gewicht:

385 – 435 mg

Verpackung:

500/7″ reel 2200/13″ reel Plastic tape: 16 mm wide, 0.4 mm thick, 8 mm pocket spacing, 3.5 mm pocket depth

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More Info.