Website-Einstellungen

Lager
Spracheinstellungen
Währungseinstellungen
Produkte
Informationsmaterial
Informationsmaterial
Video-Bibliothek
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

MSD1260 Series

Common Mode Chokes

RoHS-konform AEC-Q flag
Our MSD1260 Series common mode chokes provide both common mode and differential mode filtering in a single device. They are ideal for use in both power line and signal line applications, providing 500 Vrms, one minute winding-to-winding isolation.
 
  • Common mode and differential mode filtering in a single device
  • Ideal for use in both power line and signal line applications
  • Up to 180 MHz differential mode cutoff frequency
  • 500 Vrms, one minute winding-to-winding isolation
  • AEC-Q200 Grade 3 (−40°C to +85°C)
Refer to Designing Common Mode Filters for design guidance.
Jetzt kaufen:
Anzahl Einzelpreis
1 $1,29
250 $1,03
500 $0,90
1000 $0,73
2500 $0,65
5000 $0,59

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

. Auf Lager, noch heute versandbereit.
Muster anfordern:

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1 Leitungen Gleichtakt-
spitzenimpedanz (kΩ)
Grenz-
frequenz (MHz) 2
Induktivität
min (µH) 3
Irms (A) 4 DCR max (Ω) 5 Isolations-
spannung (Vrms) 6
MSD1260-472ML_ 2 7,39 @ 43,0 MHz 180 3,8 3,16 0,036 500
MSD1260-562ML_ 2 8,07 @ 33,0 MHz 160 4,5 3,00 0,040 500
MSD1260-682ML_ 2 7,45 @ 21,0 MHz 100 5,4 2,75 0,048 500
MSD1260-822ML_ 2 12,74 @ 27,0 MHz 120 6,6 2,63 0,052 500
MSD1260-103ML_ 2 10,36 @ 19,0 MHz 95,0 8,0 2,45 0,060 500
MSD1260-123ML_ 2 11,72 @ 18,0 MHz 74,0 9,6 2,21 0,074 500
MSD1260-153ML_ 2 15,88 @ 21,0 MHz 75,0 12 2,06 0,085 500
MSD1260-183ML_ 2 19,22 @ 17,0 MHz 58,0 14 1,93 0,097 500
MSD1260-223ML_ 2 23,97 @ 17,0 MHz 68,0 18 1,76 0,116 500
MSD1260-273ML_ 2 23,83 @ 13,0 MHz 48,0 22 1,70 0,124 500
MSD1260-333ML_ 2 28,87 @ 13,0 MHz 43,0 26 1,64 0,134 500
MSD1260-393ML_ 2 24,31 @ 11,0 MHz 39,0 31 1,59 0,142 500
MSD1260-473ML_ 2 27,25 @ 10,0 MHz 45,0 38 1,44 0,174 500
MSD1260-563ML_ 2 39,80 @ 8,9 MHz 33,0 45 1,35 0,198 500
MSD1260-683ML_ 2 41,12 @ 7,7 MHz 31,0 54 1,29 0,216 500
MSD1260-823ML_ 2 57,65 @ 8,0 MHz 31,0 66 1,15 0,274 500
MSD1260-104ML_ 2 58,69 @ 6,5 MHz 21,0 80 1,06 0,322 500
MSD1260-124KL_ 2 51,20 @ 4,9 MHz 24,0 108 0,93 0,418 500
MSD1260-154KL_ 2 41,37 @ 4,0 MHz 29,0 135 0,87 0,476 500
MSD1260-184KL_ 2 52,76 @ 4,3 MHz 19,0 162 0,82 0,536 500
MSD1260-224KL_ 2 92,17 @ 4,5 MHz 33,0 198 0,72 0,691 500
MSD1260-274KL_ 2 46,65 @ 3,3 MHz 27,0 243 0,67 0,806 500
MSD1260-334KL_ 2 118,00 @ 3,4 MHz 32,0 297 0,57 1,090 500
MSD1260-394KL_ 2 67,94 @ 2,4 MHz 14,0 351 0,55 1,200 500
MSD1260-474KL_ 2 114,70 @ 2,7 MHz 13,0 423 0,48 1,590 500
MSD1260-564KL_ 2 76,40 @ 2,3 MHz 11,0 504 0,45 1,810 500
MSD1260-684KL_ 2 218,90 @ 2,5 MHz 14,0 612 0,42 2,060 500
MSD1260-824KL_ 2 212,50 @ 2,2 MHz 4,9 738 0,37 2,650 500
MSD1260-105KL_ 2 124,20 @ 1,8 MHz 6,6 900 0,34 3,060 500
Hinweise
  1. When ordering, please specify termination and packaging codes: e.g. MSD1260-105KLC
  2. Frequency at which the differential mode attenuation equals 3 dB
  3. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
  4. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
  5. DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  6. Interwinding isolation (hipot) tested for one minute.

 

Anschlüsse:

  • L = RoHS compliant matte tin over nickel over phos bronze.
  • T = RoHS tin-silver-copper (95.5/4/0.5)(Special order, added cost)
  • S = non-RoHS tin-lead (63/37)(Special order, added cost)

Verpackung:

  • 13" reel, machine-ready
    EIA-481 embossed plastic tape (500 parts per full reel).
  • B = Less than full reel
    In tape, not machine ready. To have a leader and trailer added ($25 charge),
    use code letter D instead.
Umwelt/Umgebung
Umwelt/Umgebung:
RoHS-konform
Umgebungstemperaturbereich:
–40°C to +85°C with Irms current
Lagertemperaturbereich:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
Maximale Bauteiltemperatur:
+125°C (ambient + temp rise)
Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

Kennlinien

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

Pläne/Diagramme

schematic.png

Physikalische Eigenschaften

msd1260d.png

dims_inches_mm.gif

Gurt/Rolle-Spezifikationen

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_ak.gif
500 330 100 13 30,4 24,4 24 16 4 2 6,6 0,35

Allgemeine Spezifikation

Kernmaterial:
Ferrite
Gewicht:
2.8 – 3.2 g
Winding to Winding Isolation:
500 Vrms, one minute

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
Löttemperaturbeständigkeit:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.
Baugruppenreinigung:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

Verwandte Produktreihen