Website-Einstellungen

Lager
Spracheinstellungen
Währungseinstellungen
Produkte
Informationsmaterial
Informationsmaterial
Video-Bibliothek
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

LPD4012 Series

Low-profile Common Mode Chokes

RoHS-konform Halogenfrei
Coilcraft LPD4012 Series common mode chokes provide both common mode and differential mode filtering in a single miniature, low-profile device.  
  • Low-profile miniature CM choke measures just 4 × 4 × 1.1 mm
  • Common mode and differential mode filtering in a single device
  • Up to 600 MHz differential mode cutoff frequency
  • 100 Vrms, one minute winding-to-winding isolation
Refer to Designing Common Mode Filters for design guidance.
Jetzt kaufen:
Anzahl Einzelpreis
1 $1,03
250 $0,81
500 $0,60
1000 $0,45
2000 $0,38
5000 $0,33

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

. Auf Lager, noch heute versandbereit.
Muster anfordern:

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1 Leitungen Gleichtakt-
spitzenimpedanz (kΩ)
Grenz-
frequenz (MHz) 2
Induktivität
min (µH) 3
Irms (A) 4 DCR max (Ω) 5 Isolations-
spannung (Vrms) 6
LPD4012-331NR_ 2 0,75 @ 290 MHz 475 0,23 1,87 0,042 100
LPD4012-561NR_ 2 0,94 @ 190 MHz 460 0,39 1,30 0,087 100
LPD4012-821NR_ 2 1,78 @ 160 MHz 400 0,57 1,21 0,100 100
LPD4012-152NR_ 2 3,27 @ 150 MHz 410 1,1 1,15 0,185 100
LPD4012-222NR_ 2 4,19 @ 110 MHz 260 1,5 0,95 0,235 100
LPD4012-332NR_ 2 6,24 @ 90,0 MHz 220 2,3 0,75 0,320 100
LPD4012-472MR_ 2 10,19 @ 64,0 MHz 230 3,8 0,65 0,500 100
LPD4012-562MR_ 2 12,05 @ 62,0 MHz 270 4,5 0,55 0,620 100
LPD4012-682MR_ 2 10,18 @ 54,0 MHz 210 5,4 0,60 0,530 100
LPD4012-822MR_ 2 13,16 @ 54,0 MHz 160 6,6 0,55 0,600 100
LPD4012-103MR_ 2 16,26 @ 49,0 MHz 200 8,0 0,50 0,750 100
LPD4012-153MR_ 2 21,01 @ 35,0 MHz 110 12 0,43 1,130 100
LPD4012-223MR_ 2 28,19 @ 28,0 MHz 85,0 18 0,34 1,630 100
LPD4012-333MR_ 2 30,67 @ 22,0 MHz 110 26 0,31 1,830 100
LPD4012-473MR_ 2 35,31 @ 19,0 MHz 93,0 38 0,28 2,520 100
LPD4012-683MR_ 2 47,06 @ 15,0 MHz 69,0 54 0,25 3,230 100
LPD4012-823MR_ 2 48,72 @ 13,0 MHz 37,0 66 0,23 3,660 100
LPD4012-104MR_ 2 58,90 @ 12,0 MHz 33,0 80 0,20 4,760 100
LPD4012-124MR_ 2 69,63 @ 11,0 MHz 27,0 96 0,19 5,540 100
LPD4012-154MR_ 2 94,73 @ 9,5 MHz 42,0 120 0,17 6,900 100
LPD4012-184MR_ 2 114,84 @ 8,0 MHz 37,0 144 0,14 8,750 100
LPD4012-224MR_ 2 129,43 @ 7,2 MHz 26,0 176 0,12 11,240 100
LPD4012-334MR_ 2 162,61 @ 5,5 MHz 19,0 264 0,10 17,000 100
Hinweise
  1. When ordering, please specify termination and packaging codes: e.g. LPD4012-224MRC
  2. Frequency at which the differential mode attenuation equals 3 dB
  3. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
  4. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
  5. DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  6. Interwinding isolation (hipot) tested for one minute.

 

Anschlüsse:

  • R = Matte tin over nickel over silver.
  • Q = RoHS tin-silver-copper (95.5/4/0.5)(Special order, added cost)
  • P = non-RoHS tin-lead (63/37)(Special order, added cost)

Verpackung:

  • C = 7" machine-ready reel
    EIA-481 embossed plastic tape (1000 parts per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead.
  • D = 13" machine-ready reel
    EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel).
Umwelt/Umgebung
Umwelt/Umgebung:
RoHS-konform , Halogenfrei
Umgebungstemperaturbereich:
–40°C to +85°C with (40°C rise) Irms current
Lagertemperaturbereich:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
Maximale Bauteiltemperatur:
+125°C (ambient + temp rise)
Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

Kennlinien

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

Physikalische Eigenschaften

lpd4012d.gifLPD_CM_Choke_Schematic.gif

dims_inches_mm.gif

Gurt/Rolle-Spezifikationen

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T

1000 3500* 178/330 60/100 13 18,4 12,4 12 8 4 2 1,32 0,25
* Special order

Allgemeine Spezifikation

Kernmaterial:
Ferrite
Gewicht:
54 – 64 mg
Verpackung:
1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.25 mm thick, 8 mm pocket spacing, 1.32 mm pocket depth
Winding to Winding Isolation:
100 Vrms, one minute

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
Löttemperaturbeständigkeit:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.
Empfohlene Bestückungsaufnahme:
OD: 4 mm; ID: ≤2 mm
Baugruppenreinigung:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

Verwandte Produktreihen