Website-Einstellungen

Lager
Spracheinstellungen
Währungseinstellungen
Produkte
Informationsmaterial
Informationsmaterial
Video-Bibliothek
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

LPD5030 Series

Common Mode Chokes

RoHS-konform Halogenfrei AEC-Q flag
Coilcraft LPD5030 Series common mode chokes provide both common mode and differential mode filtering in a single miniature, low-profile device.
  • Low-profile miniature CM choke; measures only 4.8 mm square and 2.9 mm high
  • Common mode and differential mode filtering in a single device
  • Up to 490 MHz differential mode cutoff frequency
  • 100 Vrms, one minute winding-to-winding isolation
  • AEC-Q200 Grade 3 (−40°C to +85°C)
Refer to Designing Common Mode Filters for design guidance.
Jetzt kaufen:
Anzahl Einzelpreis
1 $1,07
375 $0,83
750 $0,57
1500 $0,47
3000 $0,39
6000 $0,36

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

. Auf Lager, noch heute versandbereit.
Muster anfordern:

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1 Leitungen Gleichtakt-
spitzenimpedanz (kΩ)
Grenz-
frequenz (MHz) 2
Induktivität
min (µH) 3
Irms (A) 4 DCR max (Ω) 5 Isolations-
spannung (Vrms) 6
LPD5030-571NR_ 2 0,47 @ 250 MHz 490 0,40 2,30 0,031 100
LPD5030-781NR_ 2 0,69 @ 210 MHz 400 0,55 2,25 0,038 100
LPD5030-102NR_ 2 1,03 @ 150 MHz 380 0,80 2,20 0,042 100
LPD5030-152MR_ 2 1,48 @ 110 MHz 260 1,2 2,05 0,048 100
LPD5030-222MR_ 2 1,90 @ 93,0 MHz 260 1,8 1,95 0,067 100
LPD5030-332MR_ 2 3,84 @ 66,0 MHz 210 2,6 1,70 0,077 100
LPD5030-472MR_ 2 4,34 @ 53,0 MHz 190 3,8 1,40 0,111 100
LPD5030-562MR_ 2 6,28 @ 45,0 MHz 140 4,5 1,35 0,125 100
LPD5030-682MR_ 2 7,10 @ 43,0 MHz 140 5,4 1,20 0,159 100
LPD5030-103MR_ 2 11,58 @ 36,0 MHz 110 8,0 1,05 0,210 100
LPD5030-153MR_ 2 16,01 @ 26,0 MHz 87,0 12 0,85 0,298 100
LPD5030-223MR_ 2 20,32 @ 21,0 MHz 65,0 18 0,70 0,452 100
LPD5030-333MR_ 2 34,28 @ 19,0 MHz 67,0 26 0,60 0,565 100
LPD5030-473MR_ 2 37,00 @ 13,0 MHz 50,0 38 0,50 0,806 100
LPD5030-683MR_ 2 47,73 @ 11,0 MHz 42,0 54 0,43 1,130 100
LPD5030-104MR_ 2 74,28 @ 8,7 MHz 34,0 80 0,33 1,790 100
LPD5030-154MR_ 2 83,32 @ 7,2 MHz 27,0 120 0,28 2,430 100
LPD5030-224MR_ 2 119,70 @ 5,8 MHz 20,0 176 0,24 3,300 100
LPD5030-334MR_ 2 180,50 @ 4,3 MHz 18,0 264 0,18 5,360 100
LPD5030-474MR_ 2 231,10 @ 3,6 MHz 16,0 376 0,15 7,510 100
LPD5030-684MR_ 2 285,90 @ 3,2 MHz 13,0 544 0,13 10,800 100
LPD5030-105MR_ 2 355,20 @ 2,5 MHz 11,0 800 0,10 16,500 100
Hinweise
  1. When ordering, please specify termination and packaging codes: e.g. LPD5030-224MRC
  2. Frequency at which the differential mode attenuation equals 3 dB
  3. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
  4. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
  5. DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  6. Interwinding isolation (hipot) tested for one minute.

 

Anschlüsse:

  • R = Matte tin over nickel over silver.
  • Q = RoHS tin-silver-copper (95.5/4/0.5)(Special order, added cost)
  • P = non-RoHS tin-lead (63/37)(Special order, added cost)

Verpackung:

  • C = 7" machine-ready reel
    EIA-481 embossed plastic tape (750 parts per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead.
  • D = 13" machine-ready reel
    EIA-481 embossed plastic tape. Factory order only, not stocked (2500 parts per full reel).
Umwelt/Umgebung
Umwelt/Umgebung:
RoHS-konform , Halogenfrei
Umgebungstemperaturbereich:
–40°C to +85°C with Irms current
Lagertemperaturbereich:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
Maximale Bauteiltemperatur:
+125°C (ambient + temp rise)
Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

Kennlinien

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

Pläne/Diagramme

LPD_CM_Choke_Schematic.gif

Physikalische Eigenschaften

lpd5030d.gif

dims_inches_mm.gif

Gurt/Rolle-Spezifikationen

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_aj.gif
750 2500* 178/330 60/100 13 18,4 12,4 12 8 4 2 3,1 0,32
* Special order

Allgemeine Spezifikation

Kernmaterial:
Ferrite
Gewicht:
210 – 225 mg
Winding to Winding Isolation:
100 Vrms, one minute

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
Löttemperaturbeständigkeit:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.
Empfohlene Bestückungsaufnahme:
OD: 5 mm; ID: ≤ 2.5 mm
Baugruppenreinigung:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

Verwandte Produktreihen