Website-Einstellungen

Lager
Spracheinstellungen
Währungseinstellungen
Produkte
Informationsmaterial
Informationsmaterial
Video-Bibliothek
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

LPD3015 Series

Low-profile Common Mode Chokes

RoHS-konform Halogenfrei
Coilcraft LPD3015 Series common mode chokes provide both common mode and differential mode filtering in a single low-profile miniature device.  
  • Low-profile miniature CM choke measures just 3 × 3 × 1.4 mm
  • Common mode and differential mode filtering in a single device
  • Up to 530 MHz differential mode cutoff frequency
  • 100 Vrms, one minute winding-to-winding isolation
Refer to Designing Common Mode Filters for design guidance.
Jetzt kaufen:
Anzahl Einzelpreis
1 $1,04
250 $0,84
500 $0,56
1000 $0,41
2000 $0,35
5000 $0,31

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

. Auf Lager, noch heute versandbereit.
Muster anfordern:

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1 Leitungen Gleichtakt-
spitzenimpedanz (kΩ)
Grenz-
frequenz (MHz) 2
Induktivität
min (µH) 3
Irms (A) 4 DCR max (Ω) 5 Isolations-
spannung (Vrms) 6
LPD3015-391MR_ 2 1,03 @ 330 MHz 540 0,31 1,45 0,071 100
LPD3015-561MR_ 2 1,44 @ 240 MHz 540 0,45 1,37 0,079 100
LPD3015-102MR_ 2 2,43 @ 160 MHz 330 0,80 1,08 0,129 100
LPD3015-152MR_ 2 3,56 @ 130 MHz 330 1,2 0,86 0,204 100
LPD3015-182MR_ 2 4,37 @ 110 MHz 280 1,4 0,78 0,273 100
LPD3015-222MR_ 2 4,67 @ 100 MHz 330 1,8 0,75 0,300 100
LPD3015-332MR_ 2 7,28 @ 81,0 MHz 220 2,6 0,67 0,337 100
LPD3015-472MR_ 2 10,7 @ 66,0 MHz 210 3,8 0,54 0,503 100
LPD3015-682MR_ 2 12,1 @ 54,0 MHz 290 5,4 0,49 0,622 100
LPD3015-103MR_ 2 17,8 @ 47,0 MHz 330 8,0 0,38 1,040 100
LPD3015-153MR_ 2 22,6 @ 33,0 MHz 140 12 0,32 1,420 100
LPD3015-183MR_ 2 29,0 @ 31,0 MHz 94,0 14 0,31 1,550 100
LPD3015-223MR_ 2 27,3 @ 24,0 MHz 88,0 18 0,28 1,890 100
LPD3015-333MR_ 2 41,1 @ 21,0 MHz 59,0 26 0,23 2,840 100
LPD3015-473MR_ 2 48,7 @ 18,0 MHz 50,0 38 0,19 4,030 100
LPD3015-683MR_ 2 64,5 @ 14,0 MHz 48,0 54 0,16 6,110 100
LPD3015-104MR_ 2 94,7 @ 13,0 MHz 47,0 80 0,13 8,540 100
LPD3015-124MR_ 2 116 @ 11,0 MHz 37,0 96 0,13 9,230 100
LPD3015-154MR_ 2 135 @ 9,3 MHz 27,0 120 0,11 12,400 100
LPD3015-184MR_ 2 170 @ 8,0 MHz 39,0 144 0,10 15,320 100
LPD3015-224MR_ 2 155 @ 7,1 MHz 27,0 176 0,09 18,560 100
LPD3015-334MR_ 2 222 @ 5,9 MHz 16,0 264 0,07 27,700 100
Hinweise
  1. When ordering, please specify termination and packaging codes: e.g. LPD3015-334MRC
  2. Frequency at which the differential mode attenuation equals 3 dB
  3. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
  4. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
  5. DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  6. Interwinding isolation (hipot) tested for one minute.

Anschlüsse:

  • R = Matte tin over nickel over silver
  • Q = RoHS tin-silver-copper (95.5/4/0.5)(Special order, added cost)
  • P = non-RoHS tin-lead (63/37)(Special order, added cost)

Verpackung:

  • C = 7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
Umwelt/Umgebung
Umwelt/Umgebung:
RoHS-konform , Halogenfrei
Umgebungstemperaturbereich:
–40°C to +85°C with (40°C rise) Irms current
Lagertemperaturbereich:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
Maximale Bauteiltemperatur:
+125°C (ambient + temp rise)
Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

Kennlinien

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

Pläne/Diagramme

LPD_CM_Choke_Schematic.gif

Physikalische Eigenschaften

lpd3015d.gif

dims_inches_mm.gif

Gurt/Rolle-Spezifikationen

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_aj.gif
1000 3500* 178/330 60/100 13 18,4 12,4 12 8 4 2 1,65 0,26
* Special order

Allgemeine Spezifikation

Kernmaterial:
Ferrite
Gewicht:
45 – 52 mg
Verpackung:
1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth
Winding to Winding Isolation:
100 Vrms, one minute

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
Löttemperaturbeständigkeit:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.
Empfohlene Bestückungsaufnahme:
OD: 3 mm; ID: ≤ 1.5 mm
Baugruppenreinigung:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

Verwandte Produktreihen