Website-Einstellungen

Lager
Spracheinstellungen
Währungseinstellungen
Produkte
Informationsmaterial
Informationsmaterial
Video-Bibliothek
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

PFD3215 Series

Low-profile Common Mode Chokes

RoHS-konform Halogenfrei
Our PFD3215 Series low-profile common mode chokes provide both common mode and differential-mode filtering in a single device that measures just 3.32 x 2.33 x 1.5 mm. They are ideal for use in both power line and signal line applications, providing 250 Vrms, one minute winding-to-winding isolation.
  • Low-profile miniature CM choke measures just 3.32 × 2.33 × 1.5 mm
  • Common mode and differential mode filtering in a single device
  • Ideal for use in both power line and signal line applications
  • Up to 100 MHz differential mode cutoff frequency
  • 250 Vrms, one minute winding-to-winding isolation
Refer to Designing Common Mode Filters for design guidance.
Jetzt kaufen:
Anzahl Einzelpreis
1 $0,75
100 $0,62
500 $0,51
1000 $0,44
2500 $0,35
5000 $0,32

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

. Auf Lager, noch heute versandbereit.
Muster anfordern:

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1 Leitungen Gleichtakt-
spitzenimpedanz (kΩ)
Grenz-
frequenz (MHz) 2
Induktivität
min (µH) 3
Irms (A) 4 DCR max (Ω) 5 Isolations-
spannung (Vrms) 6
PFD3215-391ME_ 2 1,02 @ 700 MHz 490 0,31 0,98 0,070 250
PFD3215-102ME_ 2 2,46 @ 420 MHz 240 0,80 0,85 0,123 250
PFD3215-182ME_ 2 4,24 @ 270 MHz 310 1,4 0,60 0,250 250
PFD3215-222ME_ 2 5,05 @ 220 MHz 300 1,7 0,57 0,265 250
PFD3215-332ME_ 2 6,51 @ 230 MHz 260 2,6 0,55 0,360 250
PFD3215-472ME_ 2 9,42 @ 180 MHz 190 3,7 0,51 0,450 250
PFD3215-682ME_ 2 13,06 @ 170 MHz 190 5,4 0,40 0,630 250
PFD3215-103ME_ 2 17,94 @ 130 MHz 170 8,0 0,27 1,250 250
Hinweise
  1. When ordering, please specify packaging code: e.g. PFD3215-103MEC
  2. Frequency at which the differential mode attenuation equals 3 dB
  3. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
  4. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
  5. DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  6. Interwinding isolation (hipot) tested for one minute.

Anschlüsse:

  • Silver-palladium-platinum-glass frit.

Verpackung:

  • C = 7" machine-ready reel
    EIA-481 embossed plastic tape 2000 parts per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead.
  • D = 13" machine-ready reel
    EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).
Umwelt/Umgebung
Umwelt/Umgebung:
RoHS-konform , Halogenfrei
Umgebungstemperaturbereich:
–40°C to +85°C with Irms current
Lagertemperaturbereich:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Maximale Bauteiltemperatur:
+125°C (ambient + temp rise)
Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

Kennlinien

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

Pläne/Diagramme

schematic.png

Physikalische Eigenschaften

pfd3215d.gif
dims_inches_mm.gif

Gurt/Rolle-Spezifikationen

tapereel_pl.gif


 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_i.gif
2000 7500* 178/330 60/100 13 14,4 8,4 8 4 4 2 1,21 0,20
* Special order

Allgemeine Spezifikation

Kernmaterial:
Ferrite
Gewicht:
18 – 28 mg
Winding to Winding Isolation:
250 Vrms, one minute

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
Löttemperaturbeständigkeit:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.
Baugruppenreinigung:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

Verwandte Produktreihen