Website-Einstellungen

Lager
Spracheinstellungen
Währungseinstellungen
Produkte
Informationsmaterial
Informationsmaterial
Video-Bibliothek
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

LPD5010 Series

Low-profile Common Mode Chokes

RoHS-konform Halogenfrei
Coilcraft LPD5010 Series common mode chokes provide both common mode and differential mode filtering in a single miniature, low-profile device. 
  • Low-profile miniature CM choke; measures only 4.8 mm square and 0.9 mm high 
  • Common mode and differential mode filtering in a single device
  • Up to 530 MHz differential mode cutoff frequency
  • 100 Vrms, one minute winding-to-winding isolation
Refer to Designing Common Mode Filters for design guidance.
Jetzt kaufen:
Anzahl Einzelpreis
1 $1,61
250 $1,35
500 $1,12
1000 $0,93
2000 $0,84
5000 $0,76

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

. Auf Lager, noch heute versandbereit.
Muster anfordern:

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1 Leitungen Gleichtakt-
spitzenimpedanz (kΩ)
Grenz-
frequenz (MHz) 2
Induktivität
min (µH) 3
Irms (A) 4 DCR max (Ω) 5 Isolations-
spannung (Vrms) 6
LPD5010-681MR_ 2 0,88 @ 200 MHz 470 0,54 1,95 0,07 100
LPD5010-102MR_ 2 1,43 @ 160 MHz 530 0,80 1,50 0,10 100
LPD5010-152MR_ 2 2,05 @ 110 MHz 380 1,20 1,20 0,15 100
LPD5010-222MR_ 2 3,03 @ 100 MHz 260 1,76 1,10 0,20 100
LPD5010-332MR_ 2 4,60 @ 80,0 MHz 190 2,64 0,95 0,27 100
LPD5010-472MR_ 2 6,47 @ 64,0 MHz 160 3,76 0,75 0,40 100
LPD5010-562MR_ 2 7,27 @ 64,0 MHz 140 4,48 0,70 0,45 100
LPD5010-682MR_ 2 8,76 @ 54,0 MHz 150 5,44 0,60 0,53 100
LPD5010-822MR_ 2 10,97 @ 49,0 MHz 180 6,56 0,50 0,70 100
LPD5010-103MR_ 2 12,53 @ 46,0 MHz 130 8,00 0,50 0,78 100
LPD5010-153MR_ 2 18,79 @ 36,0 MHz 96,0 12,00 0,42 1,19 100
LPD5010-223MR_ 2 18,52 @ 28,0 MHz 80,0 17,60 0,35 1,58 100
LPD5010-333MR_ 2 26,33 @ 20,0 MHz 55,0 26,40 0,30 2,50 100
LPD5010-473MR_ 2 35,62 @ 18,0 MHz 43,0 37,60 0,25 3,48 100
LPD5010-683MR_ 2 48,54 @ 15,0 MHz 58,0 54,40 0,19 5,10 100
LPD5010-104MR_ 2 78,14 @ 13,0 MHz 50,0 80,00 0,15 8,00 100
LPD5010-154MR_ 2 116,80 @ 9,8 MHz 26,0 120,00 0,12 11,70 100
LPD5010-224MR_ 2 129,40 @ 7,2 MHz 28,0 176,00 0,11 15,20 100
Hinweise
  1. When ordering, please specify termination and packaging codes: e.g. LPD5010-224MRC
  2. Frequency at which the differential mode attenuation equals 3 dB
  3. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
  4. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
  5. DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  6. Interwinding isolation (hipot) tested for one minute.

 

Anschlüsse:

  • R = Matte tin over nickel over silver
  • Q = RoHS tin-silver-copper (95.5/4/0.5)(Special order, added cost)
  • P = non-RoHS tin-lead (63/37)(Special order, added cost)

Verpackung:

  • C = 7" machine-ready reel
    EIA-481 embossed plastic tape (1000 parts per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead.
  • D = 13" machine-ready reel
    EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel).
Umwelt/Umgebung
Umwelt/Umgebung:
RoHS-konform , Halogenfrei
Umgebungstemperaturbereich:
–40°C to +85°C with (40°C rise) Irms current
Lagertemperaturbereich:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
Maximale Bauteiltemperatur:
+125°C (ambient + temp rise)
Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

Kennlinien

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

Pläne/Diagramme

LPD_CM_Choke_Schematic.gif

Physikalische Eigenschaften

lpd5010d.gif

dims_inches_mm.gif

Gurt/Rolle-Spezifikationen

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_aj.gif
1000 3500* 178/330 60/100 13 18,4 12,4 12 8 4 2 1,02 0,3
* Special order

Allgemeine Spezifikation

Kernmaterial:
Ferrite
Gewicht:
60 – 70 mg
Winding to Winding Isolation:
100 Vrms, one minute

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
Löttemperaturbeständigkeit:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.
Empfohlene Bestückungsaufnahme:
OD: 5 mm; ID: ≤ 2.5 mm
Baugruppenreinigung:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

Verwandte Produktreihen