View:
Introduction
Specifications
Environmental
Performance curves
Schematics
Physical characteristics
Tape & Reel
Soldering/Washing

Datasheet 3D Models

CST1-040L

Name: CST1-040LC
Brand: Coilcraft
SKU: CST1-040LC
Price: 1.19 USD
Availability: InStock

CST1-040LC

For more information and specification about the part.

Go to series

Buy Now:

Count	Unit price
1	$2.65
250	$2.14
500	$1.43
1000	$1.19
2500	$1.08
5000	$0.98

For high volume or non-stock items, request a quote.

Packaging

C = 7" machine-ready reel

. in stock, ready to ship today.

Request a Sample:

Designer's Kit:

Kit	Values	Price
C389	16 (2 of each)	$50.00

Specifications

Electrical specifications at 25°C.

Part number 1 (Hover for schematics)	Inductance min (µH) 2	DCR max 3		Turns Ratio	Volt-time product (V-µs) 4	Frequency (kHz) 5	Current (A) 6	Terminating resistance R_T (Ω) 7	Isolation Voltage (Vrms) 8	Color dot
Part number 1 (Hover for schematics)	Inductance min (µH) 2	Pri (Ω)	Sec (Ω)	Pri : Sec	Volt-time product (V-µs) 4	Frequency (kHz) 5	Current (A) 6	Terminating resistance R_T (Ω) 7	Isolation Voltage (Vrms) 8	Color dot
CST1-040LD	320	0.0007	1.1	1 : 40	21.6	23 — >1000	20.0	2.0	500	Yellow

Notes

When ordering, please specify termination and packaging codes: e.g. CST1-125LC or CST2-125LC
Inductance measured across secondary at 100 kHz, 0.1 Vrms.
DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Volt-time product is for the secondary, between pin 6 and 4 for CST1 and between pin 1 and 3 for CST2.
For specific questions regarding frequency range, please contact us at [email protected].
Primary current of 20 A causes approximately 40°C temperature rise from 25°C ambient. Higher current causes a greater temperature rise. (see Temperature Rise vs Current curve).
Terminating resistor value is based on 1 Volt output with 20 Amps flowing through the primary. Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation:
R_T (Ohms) = V_out × N_sec / I_in.
500 Vrms, one minute isolation (hipot) winding to winding.

Termination:

L = RoHS compliant tin-silver over tin over nickel over phos bronze (pins 1 – 6); RoHS compliant Matte tin over nickel over copper (pins 7 – 8).
S = non-RoHS tin-lead (63/37) over tin over nickel over phos bronze (pins 1 – 6); non-RoHS tin-lead over gold over nickel over copper (pins 7 – 8). (Special order, added cost)

Packaging:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1000 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

Environmental

Environmental:

RoHS compliant

Ambient temperature range:

−40°C to +125°C

Storage temperature range:

Component: −40°C to +165°C
Tape and reel packaging: −40°C to +80°C

Maximum part temperature:

+165°C (ambient + temp rise)

Failures in Time (FIT) / Mean Time Between Failures (MTBF):

See FIT/MTBF Calculations

Performance curves

Temperature vs. Current

Schematics

CST1 Series

Terminating resistor (R_T)value is based on 1 Volt output with 20 Amps flowing through the primary. Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation: R_T (Ohms) = V_out × N_sec / I_in.

CST2 Series

Terminating resistor (R_T) value is based on 1 Volt output with 20 Amps flowing through the primary. Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation: R_T (Ohms) = V_out × N_sec / I_in.

Physical characteristics

Pinouts

Tape and Reel specification

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
250	1000*	178/330	60/100	13	22,4	16,4	16	12	4	2	5,6	0,35

General specification

Core Material:

Ferrite

Weight:

0.4 g

Packaging:

250/7″reel;1000/13″ reel; Plastic tape: 16 mm wide, 0.35 mm thick, 12 mm pocket spacing, 5.6 mm pocket depth

Soldering/Washing

Moisture Sensitivity Level (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Resistance to soldering heat:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

Refer to Soldering Coilcraft Components before soldering.

PCB Washing:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

Warehouses

Language settings

Currency settings

CST1-040L

CST1-040LC

Selected configuration not available

Specifications

Termination:

Packaging:

Performance curves

Temperature vs. Current

Schematics

Physical characteristics

Pinouts

Tape and Reel specification

General specification

Soldering/Washing

Related products

CST1-020L

CST1-030L

CST1-050L

CST1-060L

CST1-070L

CST1-100L

CST1-125L

CST2-020L

CST2-030L

CST2-040L

CST2-050L

CST2-060L

CST2-070L

CST2-100L

CST2-125L

Related product series

CS2106 50/60 Hz Current Sense Transformer

High Frequency Current Sense Transformers

CS60 Series

CS60-010

CST1211 Series

CST2010V Series

CST3015 Series

CST2010 Series SMT

CST2020 Series

CST4835 Series

CST7030 Series

CSX7030 Series

CU8965-AL

D18XX, CS1XXX Series

SCS Series

Warning