Datasheet 3D模型

MA5509-CLD

有关该元件的更多信息和规格。

前往系列

立即购买:

索取样品:

典型应用

与Texas Instruments PM8804一起使用

输入电压	输出	功率
36 V — 72 V	3.3 V , 20 A	66 W

规格

Electrical specifications at 25°C.

Active Clamp Forward Transformer

零件号 (Hover for schematics)	0A时的电感 (µH) 1 (公差: ±10%)	DCR max			最大漏电感 (µH) 2	匝数比	隔离电压 (Vrms) 3
零件号 (Hover for schematics)	0A时的电感 (µH) 1 (公差: ±10%)	Pri (Ω)	Sec (mΩ)	Aux/Bias (mΩ)	最大漏电感 (µH) 2	Pri : Sec : Aux/Bias	隔离电压 (Vrms) 3
MA5509-CLD	70	0.059	2.800	300.000	0.838	1 : 0.2 : 0.533	1500

注释

Inductance for is for the primary, measured at 250 kHz, 0.2 Vrms, 0 Adc.
Leakage inductance is for the primary winding with the secondary windings shorted.
Isolation (hipot) is measured for one minute: 1500 Vrms from primary and aux/bias to secondary; 500 Vrms from primary to aux/bias.

端子:

RoHS-compliant. 260°C compatible. Tin-silver-copper over tin over nickel over phos bronze terminations. Other terminations available at additional cost.

包装:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (175 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).

环境

环境:

符合RoHS

环境温度范围:

–40°C to +125°C

储存温度范围:

Component: −40°C to +165°C
Tape and reel packaging: −40°C to +80°C

最高元件温度:

+165°C (ambient + self-heating)

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

原理图

Connect pin 1 to 2 and pin 3 to 4 on the PC board.
Connect pins 10, 11, and 12 together and
pins 7, 8, and 9 together on the PC board.

物理特性

卷装规格

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
175	330	100	13	50,4	44,4	44	32	4	2	12,0	0,5

一般规格

核心材料:

Ferrite

重量:

11.5 – 13.5 g

包装:

175 per 13″ reel Plastic tape: 44 mm wide, 0.5 mm thick, 32 mm pocket spacing, 12 mm pocket depth

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

仓库

语言设定

货币设定

MA5509-CLD

所选配置不可用

典型应用

规格

Active Clamp Forward Transformer

端子:

包装:

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品

RA7129-BLD

NA6083-BLD

相关产品系列

A9967-AL Surface Mount

AA1030-AL

C1023 PoE Transformer

C1048 PoE Transformer

C1099 Flyback Transformer

C1154 Flyback Transformer

C1173 Flyback Transformer

C1453 Flyback Transformer

SMT PoE Transformers

7 Watt PoE Transformers

3 Watt PoE Transformers

D1766-AL PoE Transformer

DA2062-AL PoE Transformer

DA2257-AL PoE Transformer

DA2362-AL PoE Transformer

Flyback Transformer

DA2420-AL and DA2421-AL PoE Transformers

ETH1-230 High Power

ETH1-460 PoE

FA2519-AL PoE Transformer

Midspan PoE Plus Magnetics

FA2636 Flyback Transformer

FA267x and FA2732 PoE Transformers

Flyback Transformers

FA2706 Flyback Transformer

SMT Flyback Transformers

GA3271-AL Flyback Transformer

GA3429-BL Flyback Transformer

GA3568, HA3809 Flyback Transformers

Flyback Transformer

Flyback Transformers

HA380x Flyback Transformer

HA3905 Flyback Transformer

High Power PoE Plus

JA4456-DL Flyback Transformers

PA6582-AL Flyback Transformer

120 W PoE SMT Planar Transformers

POE300 Flyback Transformers

POE600F 60 W PoE Transformers

Miniature Flyback Transformers

Flyback Transformers

High Power Flyback Transformers

POExxP Flyback Transformers

Flyback & Forward Transformers

POExxQ High Power Flyback Transformers

WA8704-ALD

ZA9609-AE Active Clamp Forward Topology

警告