站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

7 Watt PoE Transformers

for TI LM5070

符合RoHS
  • Developed for Texas Instruments LM5070 PoE Interface
  • IEEE 802.3af compliant for 7 W PoE applications
  • Industry standard EP10 surface mount package
  • Three different output current and voltages
  • Designed to operate in continuous mode at 250 kHz with input voltage of 36 – 72 Vdc

立即购买:
计数 单价
1 $3.32
250 $2.86
500 $2.49
1000 $1.93
2500 $1.67
5000 $1.53

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与Texas Instruments LM5070一起使用

零件号 输入电压 输出 1 功率 Fsw
Sec Bias
C1587-AL_ 36 V 72 V 3.3 V , 2.12 A 12 V , 0.02 A 7 W 250 kHz
C1588-AL_ 36 V 72 V 5 V , 1.4 A 12 V , 0.02 A 7 W 250 kHz
C1589-AL_ 36 V 72 V 12 V , 0.6 A 12 V , 0.02 A 7 W 250 kHz

规格

Electrical specifications at 25°C.

零件号 2
(Hover for schematics)
0A时的
电感 (µH) 3
(公差: ±10%)
最小电感
  0.65 A (µH)
DCR max (Ω) 4 最大
漏电感
(µH) 5
匝数比 6 隔离
电压 (Vrms) 7
Pri Sec Bias Pri : Sec : Bias
C1587-AL_ 155.0 139.5 0.414 0.036 0.822 4.0 1 : 0.19 : 0.667 1500
C1588-AL_ 155.0 139.5 0.414 0.060 0.822 3.6 1 : 0.262 : 0.667 1500
C1589-AL_ 155.0 139.5 0.414 0.343 0.822 3.3 1 : 0.667 : 0.667 1500
注释
  1. Output of the secondary is with the windings connected in parallel. Bias winding output is 12 V, 20 mA.
  2. When ordering, please specify packaging code: e.g. C1589-ALD
  3. Inductance is for the primary, measured at 10 kHz, 0.1 Vrms, 0 Adc.
  4. DCR for the secondary is per winding.
  5. Leakage inductance measured between pins 3 and 4 with all other pins shorted.
  6. Turns ratio is with the secondary windings connected in parallel.
  7. 1500 Vrms isolation from primary and bias to secondary.

端子:

  • RoHS-compliant. 260°C compatible. Tin-silver over tin over nickel over phos bronze terminations. Other terminations available at additional cost.

包装:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +85°C
储存温度范围:
Component: –40°C to +85°C
Tape and reel packaging: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):

原理图

lm5070_ep7s.gif
Secondary windings to be connected in parallel on PC board

物理特性

lm5070_ep10d.gif

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_f.gif
200 (C1588/1589-AL) 330 100 13 38,4 32,4 32 24 4 2 11,2 0,5
250 (C1587-AL) 330 100 13 38,4 32,4 32 20 4 2 11,2 0,5

一般规格

核心材料:
Ferrite
重量:
3.85 g
包装:
C1587-AL : 250 per 13″ reel Plastic tape: 32 mm wide, 0.5 mm thick, 20 mm pocket spacing, 11.2 mm pocket depth
C1588/C1589-AL : 200 per 13″ reel Plastic tape: 32 mm wide, 0.5 mm thick, 24 mm pocket spacing, 11.2 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested with pure water or alcohol only. More info.

相关产品系列