站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

C1453 Flyback Transformer

符合RoHS
  • Developed for TI TPS23750 PoE PD controller (PMP717 reference design)
  • Designed for discontinuous mode in isolated, non-synchronous power supplies.
立即购买:
计数 单价
1 $3.77
250 $3.01
500 $2.62
1000 $2.04
2500 $1.75
5000 $1.60

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与Texas Instruments TPS23750一起使用

输入电压 输出 1 功率 Fsw
Sec Bias
34 V 57 V 3.3 V , 1.5 A 10 V 5 W 250 kHz

规格

Electrical specifications at 25°C.

零件号 2 0A时的
电感 (µH) 3
(公差: ±10%)
最小电感
  1.22 A (µH)
DCR max (Ω) 4 最大
漏电感
(µH) 5
匝数比 6 隔离
电压 (Vrms) 7
Pri Sec Bias Pri : Sec : Bias
C1453-AL_ 50 40 0.185 0.015 0.385 1.1 1 : 0.166 : 0.5 1500
注释
  1. Output of the secondary is with the windings connected in parallel. Bias winding output is 10 V.
  2. When ordering, please specify packaging code: e.g. C1453-ALD
  3. Inductance is for the primary, measured at 250 kHz, 0.3 Vrms.
  4. DCR measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  5. Leakage inductance is for the primary winding with the secondary windings shorted.
  6. Turns ratio is with the secondary windings connected in parallel.
  7. 1500 Vrms primary to secondary isolation; 500 Vrms primary to bias isolation.

端子:

  • RoHS-compliant. 260°C compatible. Tin-silver (96.5/3.5) over tin over nickel over phos bronze terminations. Other terminations available at additional cost.

包装:

  • D = 13" machine-ready reel
    EIA 481 embossed plastic tape (500 parts per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter D instead.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +125°C
储存温度范围:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

原理图

c1453s.gif
Secondary windings to be connected
in parallel on the PC board.

物理特性

c1453d.gif
dims_inches_mm.gif

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_u.gif
500 330 100 13 30,4 24,4 24 16 4 2 6,13 0,36

一般规格

核心材料:
Ferrite
重量:
1.4 g
包装:
500 per 13″ reel Plastic tape: 24 mm wide, 0.36 mm thick, 16 mm pocket spacing, 6.13 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested with pure water or alcohol only. More info.

相关产品系列