站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

ZA9609-AE Active Clamp Forward Topology

for Texas Instruments PMP22075

符合RoHS 无卤素
The ZA9609 Active Clamp Forward Mode Transformers is specifically designed for use in PMP22075 for Texas Instruments. It has a wide input range of 9 V to 60 V along with high efficiency in a small package size.  The ZA9609 is ideal for use in 60 W applications like 12 V to 48 V PoE power supplies. 
  • Active Clamp Forward Transformer for PMP22075 for Texas Instruments
  • Wide input range 9 – 60 V
  • High efficiency in a small package
  • Ideal for isolated 60 W applications such as 12 – 48 V PoE Power supply
立即购买:
计数 单价
1 $11.46
120 $10.02
264 $7.52
504 $4.51
1008 $3.51
2400 $3.01
5000 $2.75

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与Texas Instruments PMP22075一起使用

输入电压 输出 功率
9 V 60 V 12 V , 5 A 60 W

规格

Electrical specifications at 25°C.

零件号
(Hover for schematics)
0A时的
电感 (µH) 1
(公差: ±30%)
DCR max (Ω) 最大
漏电感
(µH) 2
匝数比 隔离
电压 (Vrms) 3
Pri Sec Aux Pri : Sec : Aux
ZA9609-AE 113.9 0.0137 0.0138 0.2400 0.10 1 : 1.57 : 1.57 1500
注释
  1. Inductance is for the primary, measured at 250 kHz, 0.1 Vrms, 0 Adc.
  2. Leakage inductance is for the primary and is measured with all secondary windings shorted.
  3. 1500 Vrms, one minute isolation (hipot) from primary to secondary.

端子:

  • RoHS-compliant. 260°C compatible. Tin-silver over tin over nickel over phos bronze terminations. Other terminations available at additional cost.

包装:

24 per tray
环境
环境:
符合RoHS , 无卤素
环境温度范围:
40°C to +125°C
储存温度范围:
Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C
最高元件温度:
+165°C (Ambient + temperature rise)
故障率(FIT)/平均故障间隔时间(MTBF):

原理图

za9609s.gif

Connect pin 1 to 2, 3 to 4, pin 7 to 8 to 9,
and pin 10 to 11 to 12 on the PC board

物理特性

za9609d.gif

dims_inches_mm-(3).gif

一般规格

核心材料:
Ferrite
重量:
27.5 g
包装:
24 per tray

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品系列