Datasheet 3D模型

POE60F-50

Name: POE60F-50LD
Brand: Coilcraft
SKU: POE60F-50LD
Price: 1.76 USD
Availability: InStock

POE60F-50LD

有关该元件的更多信息和规格。

前往系列

立即购买:

计数	单价
1	$3.77
200	$3.00
600	$2.23
1000	$1.76
2400	$1.51
5000	$1.39

对于大批量采购或非库存产品，点击这里请求报价。

Termination

L = Tin-silver over tin over nickel

Packaging

D = 13" machine-ready reel

. 现货，可今天发货.

索取样品:

设计套件:

套件	电感值	价格
C372	10 (2 of each)	$53.00

规格

Electrical specifications at 25°C.

零件号 1 (Hover for schematics)	功率 (W)	0A时的电感 (µH) 2 (公差: ±10%)	最小电感 1.1 A (µH)	DCR max 3			最大漏电感 (µH) 4	匝数比 5	隔离电压 (Vrms) 6	次级输出 (V, ) 7
零件号 1 (Hover for schematics)	功率 (W)	0A时的电感 (µH) 2 (公差: ±10%)	最小电感 1.1 A (µH)	Pri (Ω)	Sec (mΩ)	Bias (mΩ)	最大漏电感 (µH) 4	Pri : Sec : Bias	隔离电压 (Vrms) 6	次级输出 (V, ) 7
POE60F-50LD	6	60.0	54.0	0.130	9.000	165.000	2.3	1 : 0.15 : 0.35	1500	5 V , 1.2 A

注释

When ordering, please specify packaging code: e.g. POE13F-12LD
Inductance is for the primary, measured at 250 kHz, 0.3 Vrms.
DCR for the primary and for the secondary are with the windings connected in parallel.
Leakage inductance is for the primary windings with the secondary windings shorted.
Turns ratios are with the primary the secondary windings connected in parallel.
1500 Vrms isolation primary and bias windings to secondary windings.
Output of the secondary is with the windings connected in parallel. Bias winding output is 12 V, 20 mA.

端子:

RoHS-compliant. 260°C compatible. Tin-silver over tin over nickel over phos bronze terminations. Other terminations available at additional cost.

包装:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (200 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead.

环境

环境:

符合RoHS

环境温度范围:

–40°C to +125°C

储存温度范围:

Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

原理图

Primary windings and secondary windings
to be connected in parallel on PC board.

物理特性

卷装规格

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
200	330	100	13	50,4	44,4	44	28	4	2	9,6	0,4

一般规格

核心材料:

Ferrite

重量:

5.0 – 5.6 g

包装:

200 per 13″ reel Plastic tape: 44 mm wide, 0.4 mm thick, 28 mm pocket spacing, 9.6 mm pocket depth

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

仓库

语言设定

货币设定

POE60F-50

POE60F-50LD

所选配置不可用

规格

端子:

包装:

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品

POE13F-18

POE13F-25

POE13F-33

POE13F-50

POE13F-12

POE60F-18

POE60F-25

POE60F-33

POE60F-12

POE13F-19

POE13F-24

相关产品系列

A9967-AL Surface Mount

AA1030-AL

C1023 PoE Transformer

C1048 PoE Transformer

C1099 Flyback Transformer

C1154 Flyback Transformer

C1173 Flyback Transformer

C1453 Flyback Transformer

SMT PoE Transformers

7 Watt PoE Transformers

3 Watt PoE Transformers

D1766-AL PoE Transformer

DA2062-AL PoE Transformer

DA2257-AL PoE Transformer

DA2362-AL PoE Transformer

Flyback Transformer

DA2420-AL and DA2421-AL PoE Transformers

ETH1-230 High Power

ETH1-460 PoE

FA2519-AL PoE Transformer

Midspan PoE Plus Magnetics

FA2636 Flyback Transformer

FA267x and FA2732 PoE Transformers

Flyback Transformers

FA2706 Flyback Transformer

SMT Flyback Transformers

GA3271-AL Flyback Transformer

GA3429-BL Flyback Transformer

GA3568, HA3809 Flyback Transformers

Flyback Transformer

Flyback Transformers

HA380x Flyback Transformer

HA3905 Flyback Transformer

High Power PoE Plus

JA4456-DL Flyback Transformers

PA6582-AL Flyback Transformer

120 W PoE SMT Planar Transformers

POE300 Flyback Transformers

POE600F 60 W PoE Transformers

Miniature Flyback Transformers

High Power Flyback Transformers

POExxP Flyback Transformers

Flyback & Forward Transformers

POExxQ High Power Flyback Transformers

High Power Transformers

WA8704-ALD

ZA9609-AE Active Clamp Forward Topology

警告