站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

HA3809-AL

符合RoHS

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $4.90
100 $4.15
250 $3.45
500 $2.92
1000 $2.51
2500 $2.16
5000 $1.99

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与Akros Silicon AS1135一起使用

输入电压 输出 1 功率 Fsw
Sec Sync
10 V 57 V 3.3 V , 9.1 A 5 V , 0.02 A 30 W 300 kHz

规格

Electrical specifications at 25°C.

零件号 2 0A时的
电感 (µH) 3
(公差: ±10%)
最小电感
  3.9 A (µH)
DCR max (Ω) 4 最大
漏电感
(nH) 5
匝数比 6 隔离
电压 (Vrms) 7
Pri Sec Bias Sync Pri : Sec : Bias : Sync
HA3809-AL_ 30 25 0.042 0.010 0.165 0.165 680 1 : 0.176 : 0.29 : 0.29 1500
注释
  1. Output of the secondary is with the windings connected in parallel. Bias winding output is 5 V, 20 mA.
  2. When ordering, please specify termination and packaging codes: HA3809-ALD
  3. . Inductance is for the primary, measured at 300 kHz, 0.7 Vrms. For the GA3568-DL inductance is per winding.
  4. DCR for the secondary is with the windings connected in parallel. For GA3568-DL DCR for the primary is with both windings connected in parallel.
  5. Leakage inductance is for the primary windings with the secondary windings shorted
  6. Turns ratios are for the primary (windings connected in parallel for the GA3568-DL) and with the secondary windings connected in parallel.
  7. 1500 Vrms, one minute isolation from primary and bias to secondary

端子:

  • L = RoHS tin-silver (96.5/3.5) over tin over nickel over phos bronze.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order)
  • S = non-RoHS tin-lead (63/37). (Special order)

包装:

  • 13" reel, machine-ready 
    EIA-481 embossed plastic tape (175 parts per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter D instead.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +125°C
储存温度范围:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

原理图

Screen-Shot-2019-10-24-at-12-24-34-PM.png

Primary windings and secondary windings each to be connected in parallel on the PC board.

物理特性

ga3568d-(1).gif

dims_inches_mm-(1).gif

卷装规格

tapereel_pl-(1).gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c-(1).gif
175 330 100 13 50,4 44,4 44 32 4 2 12,0 0,4

一般规格

核心材料:
Ferrite
重量:
11.4 – 11.8 g
包装:
175 per 13″ reel Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 11.9 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf.

相关产品

相关产品系列