站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

FA2706-BL

符合RoHS

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $4.65
200 $3.72
400 $3.24
1000 $2.52
2400 $2.16
5000 $1.98

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与STMicroelectronic PM8800一起使用

输入电压 输出 1 功率 Fsw
Sec Drive Aux
30 V 60 V 3.3 V , 6 A 5.5 V 10 V , 0.02 A 20 W 250 kHz

规格

Electrical specifications at 25°C.

零件号 2 0A时的
电感 (µH) 3
(公差: ±10%)
最小电感
  3 A (µH)
DCR max (Ω) 4 最大
漏电感
(µH) 5
匝数比 6 隔离
电压 (Vrms) 7
Pri Sec Drive Aux Pri : Sec : Drive : Aux
FA2706-BL_ 77.8 70.0 0.155 0.008 0.215 0.382 1.53 1 : 0.147 : 0.235 : 0.412 1500
注释
  1. Output of the secondary is with the windings connected in parallel. Aux winding output is 10 V; drive winding output is 5.5 V.
  2. When ordering, please specify packaging code: e.g. FA2707-BLD
  3. Inductance is for the primary, measured at 250 kHz, 0.2 Vrms.
  4. DCR for the primary and the secondary is with windings connected in parallel.
  5. Leakage inductance is for the primary, measured with the secondary and drive windings shorted.
  6. Turns ratio is with the primary and the secondary windings connected in parallel.
  7. 1500 Vrms, one minute isolation from primary and auxiliary to secondary.

端子:

  • RoHS-compliant. 260°C compatible. Tin-silver over tin over nickel over phos bronze terminations. Other terminations available at additional cost.

包装:

  • 13" machine-ready reel
    EIA-481 embossed plastic tape (200 per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter D instead
环境
环境:
符合RoHS
环境温度范围:
–40°C to +125°C
储存温度范围:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

原理图

fa2706schematic.gif

Primary and secondary windings to be
connected in parallel on the PC board.

物理特性

fa2706dimensions.gif

dims_inches_mm.gif

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T fa2706orientation.gif
200 330 100 13 50,4 44,4 44 24 4 2 11,5 0,4

一般规格

核心材料:
Ferrite
重量:
8.4 – 8.6 g
包装:
200 per 13″ reel Plastic tape: 44 mm wide, 0.4 mm thick, 24 mm pocket spacing, 11.5 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More Info.

相关产品

相关产品系列