Datasheet 3D模型

ZE263x High Isolation LLC Transformers

for Texas Instruments UCC25800-Q1

The ZE263x series builds on the proven performance of the ZC15xx (including ZC1576-AL, ZC1580-AL, ZC1581-AL, and ZC1582-AL), which are featured in the UCC25800-Q1 ultra-low EMI transformer driver for isolated bias supplies from Texas Instruments. Designed for isolated gate driver bias supplies, the ZE263x transformer offers low interwinding capacitance to minimize EMI, and provides 5656 VDC / 4000 Vrms isolation between primary and secondary.

With 7 mm creepage and clearance, and Material Group I (CTI>600) compliance, the ZE263x is ideal for LLC resonant converters in EV onboard chargers, inverters, and other high voltage auxiliary power supplies in automotive and industrial applications.

Designed for use with the UCC25800-Q1 from Texas Instruments for isolated gate driver bias supply
LLC transformers with low interwinding capacitance
5656 VDC / 4000 Vrms, one minute isolation (hipot) between primary and secondary
7 mm creepage and clearance Material Group 1 (CTI > 600)
- Insulation level may be Functional, Basic, or Reinforced depending on application variables such as working voltage, pollution degree, OVC, and altitude. Please contact Coilcraft for full details.
AEC-Q200 qualified

立即购买:

零件号

查找我的元件

计数	单价
1	$3.93
100	$3.07
600	$2.89
1000	$2.71

对于大批量采购或非库存产品，点击这里请求报价。

Termination

E = Tin-silver over tin over nickel over phos bronze.

Packaging

D = 13" machine-ready reel

. 现货，可今天发货.

索取样品:

零件号

查找我的元件

典型应用

与Texas Instruments UCC25800-Q1一起使用

零件号	输入电压	输出	Fsw
ZE2635-BED	12 V	24 V , 0.13 A	350 kHz
ZE2636-BED	12 V	15 V , 0.2 A	350 kHz
ZE2637-BED	15 V	24 V , 0.13 A	350 kHz
ZE2638-BED	15 V	5 V , 0.6 A	350 kHz

规格

Electrical specifications at 25°C.

零件号 (Hover for schematics)	0A时的电感 (µH) 1 (公差: ±35%)	DCR max		最大漏电感 (µH) 3	匝数比	电容 max (pF) 4	电压-时间乘积 (V-µs) 5	隔离电压 (Vrms) 6	Irms (A) 2
零件号 (Hover for schematics)	0A时的电感 (µH) 1 (公差: ±35%)	Pri (Ω)	Sec (mΩ)	最大漏电感 (µH) 3	Pri : Sec	电容 max (pF) 4	电压-时间乘积 (V-µs) 5	隔离电压 (Vrms) 6	Irms (A) 2
ZE2635-BED	100	0.075	153.000	2.28	1 : 2	2.43	21	4000	1.56
ZE2636-BED	100	0.075	97.000	2.42	1 : 1.3	1.78	21	4000	1.43
ZE2637-BED	100	0.075	129.000	2.36	1 : 1.7	2.27	21	4000	1.51
ZE2638-BED	100	0.075	27.000	2.6	1 : 0.4	1.61	21	4000	1.07

注释

Inductance is for the primary, measured at 333 kHz, 0.1 Vrms, 0 Adc.
Current that causes a 40°C rise from 25°C when applied to the primary winding with secondary current defined by the turns ratio. Please refer to the datasheet for secondary current info.
Leakage Inductance is for the primary, measured at 333 kHz, 0.1 Vrms with secondary windings shorted together.
Interwinding capacitance from primary to secondary. It is measured from pin 3 to 7 with pin 2 and 6 open at 333 kHz, 0.1 Vrms.
Volt-time product is for the primary, between pins 2 and 3.
5656 VDC / 4000 Vrms, one minute isolation (hipot) measured between primary and secondary.

Designed per IEC 61558-1 to meet the following requirements. Please contact [email protected] for questions about suitability for use in other application conditions.

Reinforced insulation example	Basic insulation example
Working voltage 400 Vrms	Working voltage 800 Vrms
Altitude 3000 m	Altitude 3000 m
Overvoltage category II	Overvoltage category II
Pollution degree 2	Pollution degree 2

7 mm creepage and clearance between primary and secondary windings with Material Group I.

端子:

RoHS-compliant. 260°C compatible. RoHS tin-silver over tin over nickel over phos bronze.

包装:

D = 13″ machine ready reel. EIA-481 embossed plastic tape (200 per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).

环境

环境:

符合RoHS , 无卤素

环境温度范围:

–40°C to +125°C

储存温度范围:

Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C

最高元件温度:

+165°C (ambient + temperature rise)

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

原理图

物理特性

卷装规格

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
200	330	100	13	38,4	32,4	32	20	4	2	12,3	0,5

一般规格

核心材料:

Ferrite

重量:

2.4 – 2.7 g

包装:

200 per reel, 13″ reel Plastic tape: 32 mm wide, 0.50 mm thick, 20 mm pocket spacing, 12.3 mm pocket depth

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested with pure water or alcohol only. More info.

ZE263x High Isolation LLC Transformers

for Texas Instruments UCC25800-Q1

典型应用

规格

端子:

包装:

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

Transformers

Isolation Transformers

HTX8045 Isolation Transformers

TX2 Push-Pull Transformers

ZE2774-BE Isolated Buck Transformer

ZE2531 Series

ZA9801-AE Series

Isolation Transformer

Transformers

Isolation Transformer

Miniature Surface Mount Transformers

Isolation Transformers

TX1 Push-Pull Transformers

Isolation Transformer

Isolation Transformer

ZD2155-AE Isolated Buck Transformer

Isolation Transformer

ZA9668-AE and ZB1175-AE Isolated Buck Transformers

PA6598-AL Isolation Transformer

WA8417-AL Fly-Buck Transformer

WA8582-AL

HTX7045 Isolation Transformers

ZE2413-AE Isolated Buck Transformer

仓库

语言设定

货币设定

ZE263x High Isolation LLC Transformers

for Texas Instruments UCC25800-Q1

所选配置不可用

典型应用

规格

端子:

包装:

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

Transformers

Isolation Transformers

HTX8045 Isolation Transformers

TX2 Push-Pull Transformers

ZE2774-BE Isolated Buck Transformer

ZE2531 Series

ZA9801-AE Series

Isolation Transformer

Transformers

Isolation Transformer

Miniature Surface Mount Transformers

Isolation Transformers

TX1 Push-Pull Transformers

Isolation Transformer

Isolation Transformer

ZD2155-AE Isolated Buck Transformer

Isolation Transformer

ZA9668-AE and ZB1175-AE Isolated Buck Transformers

PA6598-AL Isolation Transformer

WA8417-AL Fly-Buck Transformer

WA8582-AL

HTX7045 Isolation Transformers

ZE2413-AE Isolated Buck Transformer

警告