站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

ZE2774-BE Isolated Buck Transformer

for STMicroelectronics STEVAL-6986YT2DL

符合RoHS 无卤素 AEC-Q flag
The ZE2774-BE iso-buck boost converter transformer is optimized for the STEVAL-6986YT2DL reference design and built around the A6986I from STMicroelectronics. It supports a 5 V to 24 V input voltage range and delivers dual isolated outputs with two secondary windings. The typical output voltages, +6 V and -3 V, are designed to match the requirements of GaN gate drivers. The solution provides 1500 Vrms isolation voltage and functional insulation, with options for basic or reinforced insulation available on request. It is AEC-Q200 qualified, making it suitable for automotive and industrial power applications. For SiC MOSFET gate drivers, please refer to the ZD2020-AE transformer.
  • Optimized for the STEVAL-6986YT2DL iso-buck boost converter, based on the A6986I from STMicroelectronics
  • Designed for an input voltage range of 5 to 24 V with dual isolated outputs (6 V and -3 V)
  • Suitable for isolated GaN gate drivers, On-board chargers for HEV/EV, and industrial applications.
  • Functional insulation only. Basic or reinforced versions can be made available per request.
  • AEC-Q200 qualified

立即购买:

很抱歉,目前我们的网上商店不提供所选元件。

请点击“请求报价”联系支持部门,以获取自定义报价或了解更多信息。

. 现货,可今天发货.
索取样品:

典型应用

与STMicroelectronics STEVAL-6986YT2DL一起使用

输入电压 输出 Fsw
Sec1 Sec2
5 V 24 V 6 V , 0.2 A -3 V , 0.2 A 250 kHz

规格

Electrical specifications at 25°C.

零件号
(Hover for schematics)
0A时的
电感 (µH)
(公差: ±10%)
Isat (A) 2 DCR max 最大
漏电感
(µH) 3
匝数比 隔离
电压 (Vrms) 4
Pri (Ω) Sec1 (mΩ) Sec2 (mΩ) Pri : Sec1 : Sec2
ZE2774-BED 20 2.65 0.17 430.00 300.00 0.41 1 : 0.5 : 0.273 1500
注释
  1. Inductance is for the primary, measured at 250 kHz, 0.1 Vrms, 0 Adc.
  2. Isat: DC current that causes the primary inductance to drop 30% from its value without current.
  3. Leakage inductance is for the primary with the secondary windings shorted.
  4. 1500 Vrms, one minute isolation (hipot) between primary and secondary.

端子:

  • RoHS tin-silver-copper over tin over nickel over phos bronze

包装:

  • D = 13" machine-ready reel
    EIA 481 embossed plastic tape (900 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
环境
环境:
符合RoHS , 无卤素
环境温度范围:
−40°C to +125°C
储存温度范围:
Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C
最高元件温度:
+165°C (Ambient + temperature rise)
故障率(FIT)/平均故障间隔时间(MTBF):

性能曲线

L vs Current

原理图

ze2774s.gif





 

物理特性

ze2774d.gif

dims_inches_mm.gif

卷装规格

tapereel_pl.gif
 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c.gif
900 330 100 13 22,4 16,4 16 12 4 2 6,0 0,35

一般规格

核心材料:
Ferrite
重量:
0.57 – 0.77g
包装:
900/13″ reel Plastic tape: 16 mm wide, 0.35 mm thick, 12 mm pocket spacing, 6.0 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles.
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品系列