Datasheet 3D Model Spice Model SPICE

LPS4040 Series

Low Profile Shielded Power Inductors

Very low DCR; excellent current handling
4.0 × 4.0 mm footprint; less than 4 mm tall
AEC-Q200 Grade 1 (–40°C to +125°C)

Buy Now:

Part number

Find my part

Count	Unit price
1	$0.99
250	$0.85
500	$0.57
1000	$0.45
2500	$0.40
5000	$0.34

For high volume or non-stock items, request a quote.

Termination

R = RoHS compliant matte tin over nickel over silver

Packaging

C = 7" machine-ready reel

Tolerance

M = 20%

. in stock, ready to ship today.

Request a Sample:

Part number

Find my part

Designer's Kit:

Kit	Values	Price
C494	18 ( 3 of each)	$70.00

Specifications

Electrical specifications at 25°C.

Part number 1	Inductance (µH) 2 (Tolerance: ±20%)	DCR max (Ω) 3	SRF typ (MHz) 4	Isat (A) 5			Irms (A) 6
Part number 1	Inductance (µH) 2 (Tolerance: ±20%)	DCR max (Ω) 3	SRF typ (MHz) 4	10% drop	20% drop	30% drop	20°C rise	40°C rise
LPS4040-223MR_	22	0.21	24.0	0.620	0.780	0.830	0.850	1.200
LPS4040-683MR_	68	0.41	9.5	0.440	0.490	0.510	0.700	0.920
LPS4040-823MR_	82	0.47	8.9	0.370	0.420	0.440	0.650	0.880
LPS4040-104MR_	100	0.48	8.6	0.350	0.380	0.400	0.560	0.820
LPS4040-124MR_	120	0.53	7.3	0.330	0.360	0.380	0.500	0.740
LPS4040-154MR_	150	0.68	6.1	0.275	0.305	0.320	0.490	0.650
LPS4040-224MR_	220	0.88	4.8	0.230	0.250	0.265	0.430	0.580
LPS4040-334MR_	330	1.4	4.1	0.190	0.205	0.215	0.360	0.480
LPS4040-474MR_	470	2.2	2.9	0.150	0.170	0.180	0.270	0.370
LPS4040-564MR_	560	2.4	2.8	0.140	0.160	0.165	0.240	0.330
LPS4040-684MR_	680	3.0	2.6	0.130	0.145	0.150	0.220	0.300
LPS4040-105MR_	1000	4.0	2.0	0.105	0.115	0.120	0.200	0.270
LPS4040-155MR_	1500	6.2	1.7	0.082	0.092	0.098	0.160	0.220
LPS4040-185MR_	1800	7.8	1.5	0.074	0.084	0.090	0.140	0.190
LPS4040-225MR_	2200	8.8	1.4	0.068	0.078	0.082	0.125	0.170
LPS4040-335MR_	3300	16.4	1.1	0.058	0.064	0.068	0.100	0.140
LPS4040-475MR_	4700	22.3	0.90	0.046	0.054	0.056	0.080	0.110
LPS4040-565MR_	5600	30.0	0.77	0.042	0.048	0.051	0.070	0.100

Notes

Please specify termination and packaging codes: LPS4040-565MRC
Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. Inductance at 1 MHz is the same for parts with SRF ≥10 MHz.
DCR measured on a micro-ohmmeter.
SRF measured using Agilent/HP 8753ES or equivalent.
DC current at 25°C that causes the specified inductance drop from its value without current. Temperature derating curves.
Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

Termination:

R = RoHS compliant matte tin over nickel over silver
Q = RoHS tin-silver-copper (95.5/4/0.5) (Special order, added cost)
P = non-RoHS tin-lead (63/37) (Special order, added cost)

Packaging:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1500 parts per full reel).

Environmental

Environmental:

RoHS compliant , halogen free

Ambient temperature range:

–40°C to +125°C with (40°C rise) Irms current.

Storage temperature range:

Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C

Maximum part temperature:

+165°C (ambient + temp rise). Derating.

Failures in Time (FIT) / Mean Time Between Failures (MTBF):

See FIT/MTBF Calculations

Performance curves

Typical L vs Current

Typical L vs Frequency

Physical characteristics

General specification

Core Material:

Ferrite

Weight:

200 mg

Packaging:

500/7″ reel; 1500/13″ reel Plastic tape: 12 mm wide, 0.30 mm thick, 8 mm pocket spacing, 4.32 mm pocket depth

Soldering/Washing

Moisture Sensitivity Level (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Resistance to soldering heat:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles.

Refer to Soldering Coilcraft Components before soldering.

Recommended Pick & Place Nozzle:

OD: 4 mm; ID: ≤ 2 mm

PCB Washing:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

LPS4040 Series

Low Profile Shielded Power Inductors