View:
介绍
规格
环境
性能曲线
原理图
物理特性
卷装
焊接/清洗

PFD3215 Series

Low-profile Common Mode Chokes

Our PFD3215 Series low-profile common mode chokes provide both common mode and differential-mode filtering in a single device that measures just 3.32 x 2.33 x 1.5 mm. They are ideal for use in both power line and signal line applications, providing 250 Vrms, one minute winding-to-winding isolation.

Low-profile miniature CM choke measures just 3.32 × 2.33 × 1.5 mm
Common mode and differential mode filtering in a single device
Ideal for use in both power line and signal line applications
Up to 100 MHz differential mode cutoff frequency
250 Vrms, one minute winding-to-winding isolation

Refer to Designing Common Mode Filters for design guidance.

立即购买:

零件号

查找我的元件

计数	单价
1	$0.80
100	$0.72
500	$0.59
1000	$0.51
2500	$0.41
5000	$0.38

对于大批量采购或非库存产品，点击这里请求报价。

Termination

E = Silver-palladium-platinum-glass frit

Packaging

C = 7" machine-ready reel

Tolerance

M = 20%

. 现货，可今天发货.

索取样品:

零件号

查找我的元件

规格

Electrical specifications at 25°C.

零件号 1	线组数	共模峰值阻抗 (kΩ)	截止频率 (MHz) 2	最小电感 (µH) 3	Irms (A) 4	DCR max (Ω) 5	隔离电压 (Vrms) 6
零件号 1	线组数	共模峰值阻抗 (kΩ)	截止频率 (MHz) 2	最小电感 (µH) 3	Irms (A) 4	DCR max (Ω) 5	隔离电压 (Vrms) 6
PFD3215-391ME_	2	1.02 @ 700 MHz	490	0.31	0.98	0.070	250
PFD3215-102ME_	2	2.46 @ 420 MHz	240	0.80	0.85	0.123	250
PFD3215-182ME_	2	4.24 @ 270 MHz	310	1.4	0.60	0.250	250
PFD3215-222ME_	2	5.05 @ 220 MHz	300	1.7	0.57	0.265	250
PFD3215-332ME_	2	6.51 @ 230 MHz	260	2.6	0.55	0.360	250
PFD3215-472ME_	2	9.42 @ 180 MHz	190	3.7	0.51	0.450	250
PFD3215-682ME_	2	13.06 @ 170 MHz	190	5.4	0.40	0.630	250
PFD3215-103ME_	2	17.94 @ 130 MHz	170	8.0	0.27	1.250	250

注释

When ordering, please specify packaging code: e.g. PFD3215-103MEC
Frequency at which the differential mode attenuation equals 3 dB
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Interwinding isolation (hipot) tested for one minute.

端子:

Silver-palladium-platinum-glass frit.

包装:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).

环境

环境:

符合RoHS , 无卤素

环境温度范围:

–40°C to +85°C with Irms current

储存温度范围:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

最高元件温度:

+125°C (ambient + temp rise)

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

性能曲线

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

原理图

物理特性

卷装规格

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
2000	7500*	178/330	60/100	13	14,4	8,4	12	4	4	2	1,65	0,23

* Special order

一般规格

核心材料:

Ferrite

重量:

18 – 28 mg

包装:

2000/7″ reel; 7500/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.65 mm pocket depth

Winding to Winding Isolation:

250 Vrms, one minute

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

PFD3215 Series

Low-profile Common Mode Chokes

规格

端子:

包装:

性能曲线

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

CJ5100

CQ7584

CR7856

DFT4532 Series

PFD2015 Series

M2022 Series

LPD3015 Series

LPD4012 Series

LPD5010 Series

LPD5030 Series

LPD5030V Series

LPD6235 Series

PDLF Series

DFT7160 Series

CDF Series

MSD1048 Series

MSD1260 Series

MSD1260T Series

MSD1278 Series

MSD1514 Series

MSD1583 Series

MSD7342 Series

DLF Series

仓库

语言设定

货币设定

PFD3215 Series

Low-profile Common Mode Chokes

所选配置不可用

规格

端子:

包装:

性能曲线

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

CJ5100

CQ7584

CR7856

DFT4532 Series

PFD2015 Series

M2022 Series

LPD3015 Series

LPD4012 Series

LPD5010 Series

LPD5030 Series

LPD5030V Series

LPD6235 Series

PDLF Series

DFT7160 Series

CDF Series

MSD1048 Series

MSD1260 Series

MSD1260T Series

MSD1278 Series

MSD1514 Series

MSD1583 Series

MSD7342 Series

DLF Series

警告