View:
介绍
规格
环境
性能曲线
原理图
物理特性
卷装
焊接/清洗

Datasheet 3D Model

MSD1583T Series

Common Mode Chokes

The MSD1583T series high-temperature common mode chokes deliver both common-mode and differential-mode filtering in a single device. They are ideal for power line and signal line applications, offering 500 Vrms one-minute winding-to-winding isolation.

Only 8.6 mm high and 15 mm square
Ideal for use in both power line and signal line applications
Common- and differential-mode filtering in a single device
Up to 38 MHz differential mode cutoff frequency
Can be used as coupled inductors for SEPIC applications

Refer to Designing Common Mode Filters for design guidance.

立即购买:

零件号

查找我的元件

索取样品:

零件号

查找我的元件

规格

Electrical specifications at 25°C.

零件号 1	线组数	共模峰值阻抗 (kΩ)	截止频率 (MHz) 2	最小电感 (µH) 3	Irms (A) 4	DCR max (Ω) 5	隔离电压 (Vrms) 6
零件号 1	线组数	共模峰值阻抗 (kΩ)	截止频率 (MHz) 2	最小电感 (µH) 3	Irms (A) 4	DCR max (Ω) 5	隔离电压 (Vrms) 6
MSD1583T-103MED	2	10.86 @ 17.0 MHz	38.0	8.0	3.68	0.031	500
MSD1583T-123MED	2	12.11 @ 16.0 MHz	30.0	9.6	3.54	0.037	500
MSD1583T-153MED	2	12.31 @ 14.0 MHz	25.0	12	3.18	0.045	500
MSD1583T-183MED	2	15.77 @ 13.0 MHz	25.0	14	3.04	0.048	500
MSD1583T-223MED	2	14.47 @ 12.0 MHz	28.0	18	2.44	0.065	500
MSD1583T-333MED	2	33.82 @ 9.0 MHz	28.0	26	2.16	0.095	500
MSD1583T-473MED	2	39.79 @ 7.6 MHz	23.0	38	1.98	0.115	500
MSD1583T-683MED	2	49.24 @ 5.9 MHz	17.0	54	1.56	0.165	500
MSD1583T-104KED	2	69.83 @ 5.0 MHz	16.0	90	1.24	0.26	500
MSD1583T-154KED	2	73.09 @ 3.9 MHz	12.0	135	1.06	0.38	500
MSD1583T-224KED	2	78.91 @ 3.3 MHz	9.7	198	0.92	0.46	500
MSD1583T-474KED	2	104.90 @ 2.2 MHz	7.4	423	0.65	1.04	500
MSD1583T-105KED	2	129.00 @ 1.5 MHz	5.8	900	0.42	2.4	500

注释

When ordering, please specify termination code: e.g. MSD1583T-105KED
Frequency at which the differential mode attenuation equals 3 dB.
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Interwinding isolation (hipot) tested for one minute.

端子:

E = RoHS compliant matte tin over nickel over phos bronze.
Q = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
P = non-RoHS tin-lead (63/37). (Special order, added cost)

包装:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (300 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).

环境

环境:

符合RoHS , 无卤素

环境温度范围:

–40°C to +125°C with Irms current

储存温度范围:

Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C

最高元件温度:

+165°C (ambient + temp rise)

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

性能曲线

Typical Attenuation (Ref: 50 Ohms)

Typical Impedance vs Frequency

原理图

物理特性

卷装规格

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
300	330	100	13	38,4	32,4	32	24	4	2	8,6	0,5

一般规格

核心材料:

Ferrite

重量:

3.7 – 4.4 g

包装:

Packaging 300/13″ reel; Plastic tape: 32 mm wide, 0.5 mm thick, 24 mm pocket spacing, 8.6 mm pocket depth

Winding to Winding Isolation:

500 Vrms, one minute

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

MSD1583T Series

Common Mode Chokes

规格

端子:

包装:

性能曲线

Typical Attenuation (Ref: 50 Ohms)

Typical Impedance vs Frequency

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

CJ5100

CQ7584

CR7856

DFT4532 Series

DFT7160 Series

ZE2549 Series

PFD2015 Series

PFD3215 Series

M2022 Series

LPD3015 Series

LPD4012 Series

LPD5010 Series

LPD5030 Series

LPD5030V Series

LPD6235 Series

PDLF Series

CDF Series

MSD1048 Series

MSD1260 Series

MSD1260T Series

MSD1278 Series

MSD1514 Series

MSD1583 Series

MSD7342 Series

DLF Series

仓库

语言设定

货币设定

MSD1583T Series

Common Mode Chokes

所选配置不可用

规格

端子:

包装:

性能曲线

Typical Attenuation (Ref: 50 Ohms)

Typical Impedance vs Frequency

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

CJ5100

CQ7584

CR7856

DFT4532 Series

DFT7160 Series

ZE2549 Series

PFD2015 Series

PFD3215 Series

M2022 Series

LPD3015 Series

LPD4012 Series

LPD5010 Series

LPD5030 Series

LPD5030V Series

LPD6235 Series

PDLF Series

CDF Series

MSD1048 Series

MSD1260 Series

MSD1260T Series

MSD1278 Series

MSD1514 Series

MSD1583 Series

MSD7342 Series

DLF Series

警告