站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

MSD1583 Series

Common Mode Chokes

符合RoHS 无卤素
Our MSD1583 Series common mode chokes provide both common mode and differential mode filtering in a single device. They are ideal for use in both power line and signal line applications, providing 500 Vrms, one minute winding-to-winding isolation.
  • Common- and differential-mode filtering in a single device
  • Ideal for use in both power line and signal line applications
  • Up to 44 MHz differential mode cutoff frequency
  • 500 Vrms, one minute winding-to-winding isolation
Refer to Designing Common Mode Filters for design guidance.
立即购买:
计数 单价
1 $3.95
300 $2.59
600 $1.56
1200 $1.21
2400 $1.04
4800 $0.96

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

规格

Electrical specifications at 25°C.

零件号 1 线组数 共模
峰值阻抗 (kΩ)
截止
频率 (MHz) 2
最小
电感 (µH) 3
Irms (A) 4 DCR max (Ω) 5 隔离
电压 (Vrms) 6
MSD1583-103ME_ 2 10.86 @ 17.0 MHz 38.0 8.0 3.68 0.031 500
MSD1583-123ME_ 2 12.11 @ 16.0 MHz 30.0 9.6 3.54 0.037 500
MSD1583-153ME_ 2 12.31 @ 14.0 MHz 25.0 12 3.18 0.045 500
MSD1583-183ME_ 2 15.77 @ 13.0 MHz 25.0 14 3.04 0.048 500
MSD1583-223ME_ 2 14.47 @ 12.0 MHz 28.0 18 2.44 0.065 500
MSD1583-333ME_ 2 33.82 @ 9.0 MHz 28.0 26 2.16 0.095 500
MSD1583-473ME_ 2 39.79 @ 7.6 MHz 23.0 38 1.98 0.115 500
MSD1583-683ME_ 2 49.24 @ 5.9 MHz 17.0 54 1.56 0.165 500
MSD1583-104KE_ 2 69.83 @ 5.0 MHz 16.0 90 1.24 0.260 500
MSD1583-154KE_ 2 73.09 @ 3.9 MHz 12.0 135 1.06 0.380 500
MSD1583-224KE_ 2 78.91 @ 3.3 MHz 9.7 198 0.92 0.460 500
MSD1583-474KE_ 2 104.90 @ 2.2 MHz 7.4 423 0.65 1.040 500
MSD1583-105KE_ 2 129.00 @ 1.5 MHz 5.8 900 0.42 2.400 500
注释
  1. When ordering, please specify termination and packaging codes: e.g. MSD1583-105KEC
  2. Frequency at which the differential mode attenuation equals 3 dB
  3. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
  4. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
  5. DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  6. Interwinding isolation (hipot) tested for one minute.

端子:

  • E = RoHS compliant matte tin over nickel over phos bronze.
  • Q = RoHS tin-silver-copper (95.5/4/0.5)(Special order, added cost)
  • P = non-RoHS tin-lead (63/37)(Special order, added cost)

包装:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (300 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
环境
环境:
符合RoHS , 无卤素
环境温度范围:
–40°C to +85°C with Irms current
储存温度范围:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
最高元件温度:
+125°C (ambient + temp rise)
故障率(FIT)/平均故障间隔时间(MTBF):

性能曲线

Typical Attenuation (Ref: 50 Ohms)

Typical Impedance vs Frequency

原理图

schematic.png

物理特性

msd1583.png

dims_inches_mm.gif

卷装规格

tapereel_pl.gif


 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_ak.gif
300 330 100 13 38,4 32,4 32 24 4 2 8,6 0,5

一般规格

核心材料:
Ferrite
重量:
3.7 – 4.4 g
Winding to Winding Isolation:
500 Vrms, one minute

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品系列