サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

HPF2187L

HPF2187LC

RoHS準拠

部品の詳細情報と仕様について

シリーズへ移動
今すぐ購入:
個数 単価
1 $3.45
250 $2.78
500 $1.66
1000 $1.44
2500 $1.26
5000 $1.14

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:

仕様

Electrical specifications at 25°C.

Common Mode Choke

部品番号 1 インダクタンス (µH) 2 DCR max (Ω) 3
HPF2187L_ 10 0.15
メモ
  1. When ordering, please specify packaging code: e.g. HPX2126LD, HPF2187LC
  2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc.
  3. DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  4. Isolation is measured from primary to secondary of each transformer.
  5. Current flowing through each secondary that causes a 20°C temperature rise from 25°C ambient

終端処理:

  • RoHS Tin-silver-copper over tin over nickel over phos bronze. Other terminations available at additional cost.

パッケージ:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (300 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
環境
環境:
RoHS準拠
周囲温度範囲:
−40°C to +85°C
保管温度範囲:
Component: −40°C to +85°C
Tape and reel packaging: −40°C to +80°C
時間内の障害(FIT)/平均障害間隔(MTBF):

性能曲線

L vs Offset Current (Isolation Transformer)

Common Mode Rejection

Crosstalk

Differential to Common Mode Rejection

Insertion Loss

Return Loss

物理的特徴

HPX2126L Isolation Transformer

poe_hp_dit.gif


HPF2187L Common Mode Choke

poe_hpdcmc.gif

テープ&リール仕様

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
  13" (330 mm) A B C D E W P Po P1 H T part_or_c.gif
HPX2126L 300 330 100 13 38,4 32,4 32 20 4 2 11,0 0,5
 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
  7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_w.gif
HPF2187L 500 1500* 178/330 60/100 13 22,4 16,4 16 12 4 2 3,1 0,3
* Special order

一般仕様

コア材料:
Ferrite
重量:
HPF2187L: 240 mg; HPX2126L: 3.9 g
パッケージ:
HPF2187L: 500/7″ reel; 2000/13″ reel; Plastic tape: 16 mm wide, 0.35 mm thick, 8 mm pocket spacing, 4.4 mm pocket depth
HPX2126L: 300/13″ reel; Plastic tape: 32 mm wide, 0.5 mm thick, 20 mm pocket spacing, 11 mm pocket depth

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More Info.

関連製品

関連製品シリーズ