XGL3520 Series

Ultra-Low Loss Shielded Power Inductors

XGL3520 molded power inductors offer our lowest DC losses and extremely low AC losses for a wide range of DC-DC converters. Additional performance benefits include a wider range of inductance values and improved I_rms current ratings.

Industry's lowest DCR and ultra low AC losses over a wide frequency range
Superior current handling with soft saturation characteristics
AEC-Q200 Grade 1 (−40°C to +125°C)
Wide inductance range from 0.1 µH to 4.7 µH
RoHS-compliant, halogen free. 260°C compatible. Tin-silver (96.5/3.5) over copper terminations
COTS Plus tin-silver-copper and tin-lead terminations available

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Anzahl	Einzelpreis
1	$2,17
100	$1,90
250	$1,43
500	$0,86
1000	$0,67
2500	$0,58
5000	$0,53

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Termination

E = Tin-silver

Packaging

C = 7" machine-ready reel

Tolerance

M = 20%

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Teilenummer

Finde mein Bauteil

Designer-Kits:

Kit	Werte	Preis
C490	14 (3 of each)	$55,00
C509	49 (3 of each)	$125,00

Technische Daten

Electrical specifications at 25°C. Operating voltage 0 — 80 V

Teilenummer 1	Induktivität (µH) 2 (Toleranz: ±20%)	DCR (mΩ) 3		SRF typ (MHz) 4	Isat (A) 5			Irms (A) 6
Teilenummer 1	Induktivität (µH) 2 (Toleranz: ±20%)	typ	max	SRF typ (MHz) 4	10% drop	20% drop	30% drop	20°C rise	40°C rise
XGL3520-101MEC	0,10	2,3	2,7	360	7,5	11,7	15,9	19,2	26,2
XGL3520-201MEC	0,20	3,2	3,7	210	5,5	8,5	11,4	16,2	22,1
XGL3520-301MEC	0,30	4,1	4,8	165	4,5	7,2	9,7	14,1	19,1
XGL3520-451MEC	0,45	5,9	6,8	120	3,6	5,8	7,8	12,0	16,4
XGL3520-561MEC	0,56	7,9	9,1	105	3,2	5,0	6,9	9,9	13,6
XGL3520-681MEC	0,68	8,4	9,7	100	3,1	4,8	6,6	8,9	12,4
XGL3520-821MEC	0,82	10,4	12,0	95	2,8	4,5	6,2	7,8	10,4
XGL3520-102MEC	1,0	12,8	14,8	80	2,4	3,9	5,4	7,5	10,1
XGL3520-122MEC	1,2	15,8	18,2	75	2,2	3,5	4,7	6,3	8,6
XGL3520-152MEC	1,5	19,8	22,8	65	2,0	3,1	4,1	5,8	7,8
XGL3520-182MEC	1,8	24,1	27,8	60	1,9	2,9	4,0	4,9	6,6
XGL3520-222MEC	2,2	27,6	31,8	50	1,8	2,7	3,7	4,2	6,0
XGL3520-332MEC	3,3	42,9	49,4	40	1,4	2,1	2,8	3,7	5,1
XGL3520-472MEC	4,7	63,1	72,6	35	1,1	1,8	2,3	3,1	4,3

Hinweise

When ordering, please specify termination and packaging codes: e.g. XGL3520-472MEC
Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 4395A or equivalent.
Isat: DC current at 25°C that causes the specified inductance drop from its value without current.
Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.

Anschlüsse:

E = Halogen free component. RoHS compliant tin-silver over copper terminations.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

Verpackung:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (1000 per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (3000 per full reel). Factory order only, not stocked.

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform , Halogenfrei

Umgebungstemperaturbereich:

–40°C to +125°C with (40°C rise) Irms current

Lagertemperaturbereich:

Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C

Maximale Bauteiltemperatur:

+165°C (ambient + temp rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Inductance vs. Frequency

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
1000	3000*	178/330	60/100	13	18,4	12,4	12	8	4	2	2,2	0,21

* Special order

Allgemeine Spezifikation

Kernmaterial:

Composite

Gewicht:

0.11 – 0.12 g

Verpackung:

1000/7″ reel; 3000/13″ reel Plastic tape: 12 mm wide, 0.21 mm thick, 8 mm pocket spacing, 2.2 mm pocket depth.

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

XGL3520 Series

Ultra-Low Loss Shielded Power Inductors