Datasheet 3D Model SPICE SPICE-Modell

SLZ1380 Series

High Current Ferrite Beads

Wirewound surface mount package
High current ferrite beads designed for high frequency EMI noise cancellation
Optimized for CISPR 25 EMC compliance, 30 MHz to 3 GHz
AEC-Q200 Qualified

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Muster anfordern:

Teilenummer

Finde mein Bauteil

Technische Daten

Electrical specifications at 25°C.

Teilenummer	Impedanz typ (Ω)		Induktivität (nH) 1 (Toleranz: ±20%)	DCR (Toleranz: ±10%) (mΩ) 2	Isat (A) 3	Irms (A) 4
Teilenummer	100 MHz	1 GHz	Induktivität (nH) 1 (Toleranz: ±20%)	DCR (Toleranz: ±10%) (mΩ) 2	Isat (A) 3	at 20°C Rise	at 40°C Rise
SLZ1380-650MED	65	180	100	0,18	94	32	41
SLZ1380-131MED	130	153	330	0,18	26	32	41

Hinweise

Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
DCR is measured on a micro-ohmmeter at points indicated in the diagram below.
DC current that causes an inductance drop of 20% (typ) from its value without current.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, air flow, and proximity to other components. Therefore temperature rise should be verified in application conditions. Temperature derating curves.

Anschlüsse:

RoHS compliant matte tin over nickel over copper

Verpackung:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform , Halogenfrei

Umgebungstemperaturbereich:

–40°C to +105°C with (40°C rise) Irms current.

Lagertemperaturbereich:

Component: –40°C to +105°C.
Tape and reel packaging: –40°C to +80°C

Maximale Bauteiltemperatur:

145°C (ambient + temp rise).

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

L vs Current vs Temperature

Impedance vs Frequency

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
500	330	100	13	30,4	24,4	24	16	4	2	8,13	0,4

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

5.41 – 5.98 g

Verpackung:

500/13″ reel; Plastic tape: 24 mm wide, 0.40 mm thick, 16 mm pocket spacing, 8.1 mm pocket depth

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

SLZ1380 Series

High Current Ferrite Beads