View:
Einführung
Technische Daten
Umwelt/Umgebung
Kennlinien
Pläne/Diagramme
Physikalische Eigenschaften
Gurt/Rolle
Löten/Reinigen

Datasheet S-Param 3D-Modelle

WBC4-14L

Name: WBC4-14LC
Brand: Coilcraft
SKU: WBC4-14LC
Price: 2,31 USD
Availability: InStock

WBC4-14LC

Für weitere Informationen und Spezifikationen zum Bauteil.

Gehe zu Baureihe

Jetzt kaufen:

Anzahl	Einzelpreis
1	$4,77
375	$3,84
750	$2,31
1500	$1,81

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Packaging

C = 7" machine-ready reel

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Designer-Kits:

Kit	Werte	Preis
C393	12 (3 of each)	$45,00

Technische Daten

Electrical specifications at 25°C. Measurements are referenced to 50 Ohms.

Teilenummer 1 (Hover for schematics)	L min pro Wicklung (µH) 2		Prüffrequenz (kHz)	DCR max (mΩ) 3		Imp. ratio pri:sec 4	Nennstrom (mA)	Einspeisungs- dämpfung (db)	DC-Unsymmetrie 5	Bandbreite (MHz)	Isolations- spannung (Vrms)	Diagramm	Farbpunkt
Teilenummer 1 (Hover for schematics)	Pri	Sec	Prüffrequenz (kHz)	Pri	Sec	Imp. ratio pri:sec 4	Nennstrom (mA)	Einspeisungs- dämpfung (db)	DC-Unsymmetrie 5	Bandbreite (MHz)	Isolations- spannung (Vrms)	Diagramm	Farbpunkt
WBC4-14L_	2,0	8,0	100	50,0	100	1 : 4	250	2	15,0	1,5 — 1200	300	B	Green

Hinweise

When ordering, please specify termination and packaging codes: e.g. WBC16-1TLC
Inductance measured at 100 kHz, 0.1 V, 0 Adc on an Agilent/ HP 4192 or equivalent.
DCR measured at 25°C on a micro-ohmmeter. DCR measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Impedance ratio is for the full primary winding to the full secondary winding.
DC imbalance is the maximum difference in current measured at pins 1 and 3 with the source at pin 2. Inductance drop is 15% at maximum imbalance.

Anschlüsse:

L = RoHS compliant tin-silver-copper (95.5/4/0.5) over silver-platinum-glass frit.
S = non-RoHS tin-lead (63/37). (Special order, added cost)

Verpackung:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2500 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform

Umgebungstemperaturbereich:

–40°C to +85°C

Lagertemperaturbereich:

Component: –40°C to +85°C
Tape and reel packaging: –40°C to +80°C

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Frequency Response

Measured on a network analyzer (re: 50 Ohms)

Imbalance Curve

Measured on a network analyzer (re: 50 Ohms)

Pläne/Diagramme

A	B	C	D

Physikalische Eigenschaften

Gurt/Rolle-Spezifikationen

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
750	2500*	178/330	60/100	13	18,4	12,4	12	8	4	2	2,9	0,3

* Special order

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

68.0 – 88.8 mg

Verpackung:

750/7″reel; 2500/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 2.9 mm pocket depth

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

WBC4-14L

WBC4-14LC