Datasheet 3D Model

Isolation Transformer

Developed to work with Texas Instruments SN6501 Transformer Driver for Isolated Power Supplies
Mounted on the Texas Instruments SN6501xEVM Evaluation Modules used to analyze the SN6501 oscillator/power driver
Center tapped primary and secondary
Designed to meet UL/CSA/IEC 60950 Basic Insulation with 1.5 mm creepage and clearance.

立即购买:

计数	单价
1	$5.18
300	$4.17
600	$2.50
1200	$1.96
2400	$1.67
5000	$1.54

对于大批量采购或非库存产品，点击这里请求报价。

Packaging

D = 13" machine-ready reel

. 现货，可今天发货.

索取样品:

典型应用

与Texas Instruments SN6501一起使用

输入电压	初级电压	次级电压	功率 1
3 V — 5.5 V	3.3 V	5 V	2 W

规格

Electrical specifications at 25°C.

零件号 2 (Hover for schematics)	最小电感 (µH) 3	DCR max 4		最大漏电感 (µH) 5	匝数比	电压-时间乘积 (V-µs) 6	隔离电压 (Vrms) 7
零件号 2 (Hover for schematics)	最小电感 (µH) 3	Pri (Ω)	Sec (mΩ)	最大漏电感 (µH) 5	Pri : Sec	电压-时间乘积 (V-µs) 6	隔离电压 (Vrms) 7
MA5632-ALD	17.8	0.086	219.000	0.464	1 : 2	17.6	2500

注释

Calculated output power based on 150 kHz operating frequency. Power varies depending on application.
When ordering, please specify termination and packaging codes: e.g. MA5632-ALD
Inductance is tested between pins 4 and 3 at 500 kHz, 0.5 Vrms, 0 Adc.
DCR is per winding at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Leakage inductance is for the primary with both windings connected in series and with the secondary windings shorted.
Based on Bsat of the core at 25°C and number of turns on winding 4-3.
2500 Vrms, one minute primary to secondary isolation.

端子:

L = RoHS compliant tin-silver over tin over nickel over phos bronze.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

包装:

D = 13″ machine ready reel. EIA-481 embossed plastic tape (600 per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

环境

环境:

符合RoHS

环境温度范围:

–40°C to +125°C

储存温度范围:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

原理图

物理特性

卷装规格

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
600	330	100	13	30,4	24,4	24	16	4	2	6,1	0,37

一般规格

核心材料:

Ferrite

重量:

0.98 g

包装:

600/13″ reel Plastic tape: 24 mm wide, 0.37 mm thick, 16 mm pocket spacing, 6.1 mm pocket depth

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.