站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

CST3015-400E

符合RoHS 无卤素 AEC-Q flag

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $10.26
90 $8.38
270 $6.28
540 $3.77
1080 $2.93
2520 $2.51
5040 $2.30

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

规格

Electrical specifications at 25°C.

零件号
(Hover for schematics)
Inductance
nom (mH) 1
(公差: ±25%)
DCR max (Ω) 匝数比 电压-时间
乘积 (V-µs) 2
频率 (kHz) Sensed current (A) 3 终端
电阻 RT (Ω) 4
隔离
电压 (Vrms) 5
Pri Sec Pri : Sec
CST3015-400ED 51.2 0.0001 24.4 1 : 400 2553 0.2 1000 83.0 4.0 5000
注释
  1. Inductance measured between secondary pins at 1 kHz, 0.1 Vrms.
  2. Maximum volt-time product is for the secondary, based on 2000 Gauss.
  3. Primary current that causes approximately 40°C temperature rise from 25°C ambient. Higher current causes a greater temperature rise.
  4. Terminating resistance (RT) value is based on 1 Volt output with 100 Amps flowing through the primary. Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation:
    RT (Ohms) = Vout × Nsec / Iin.
  5. 5000 Vrms, one minute isolation (hipot) winding to winding.

端子:

  • E = RoHS compliant tin-silver-copper over copper (pins 1 – 2); RoHS compliant tin-silver-copper over matte tin over nickel over phos bronze (pins 3 – 4).

包装:

  • D = 13" machine-ready reel
    EIA-481 embossed plastic tape (90 parts per full reel).
环境
环境:
符合RoHS , 无卤素
环境温度范围:
−40°C to +125°C
储存温度范围:
Component: −40°C to +165°C
Tape and reel packaging: −40°C to +80°C
最高元件温度:
+165°C (Ambient + temperature rise)
故障率(FIT)/平均故障间隔时间(MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

性能曲线

Temperature vs Current

原理图

cst3015s.gif

物理特性

cst3015d.gif

dims_inches_mm-(1).gif

卷装规格

tapereel_pl.gif
 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_e.gif
90 330 100 13 62,4 56,4 56 36 4 2 16,0 0,5

一般规格

核心材料:
Ferrite
重量:
16.6 – 16.9 g
包装:
90/13″ reel; Plastic tape: 56 mm wide, 0.5 mm thick, 36 mm pocket spacing, 16 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity
抗焊接热:
Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品

相关产品系列