站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

DA2034-AL

符合RoHS

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $6.22
175 $4.66
700 $2.80
1400 $2.17
2800 $1.89
5000 $1.71

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与ADIPowerbyLinear LT3750一起使用

输入电压 Fsw
3 V 24 V 100 kHz

规格

Electrical specifications at 25°C.

零件号 1 0A时的
电感 (µH) 2
(公差: ±10%)
最小电感
  10 A (µH)
DCR max (Ω) 3 最大
漏电感
(µH) 4
匝数比 电容
max (pF)
隔离
电压 (Vrms) 5
Pri Sec Pri : Sec
DA2034-AL_ 10.0 9.0 0.018 1.8 0.250 1 : 10 128 1500
注释
  1. When ordering, please specify packaging code: e.g. DA2034-ALD
  2. Inductance is for the primary, measured at 100 kHz, 0.1 Vrms, 0 Adc.
  3. DCR is at 25°C with the primary windings connected in parallel. For other operating temperatures, use this DCR at Temperature calculator.
  4. Leakage inductance is with the primary windings connected in parallel and with the secondary winding shorted.
  5. 1500 Vrms primary to secondary isolation and 750 Vrms winding to core isolation, tested for one minute.

端子:

  • RoHS compliant tin-silver over tin over nickel over phos bronze. Other terminations available at additional cost.

包装:

  • D = 13" machine-ready reel
    EIA 481 embossed plastic tape (DA2032-AL and DA2033-AL: 200 parts per full reel;
    DA2034-AL: 175 parts per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter D instead.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +125°C
储存温度范围:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

原理图

da2032-4s.gif

物理特性

DA2032-AL

da2032d.gif

 

DA2033-AL

da2033d.gif

 

DA2034-AL

da2034d.gif
 

卷装规格

tapereel_pl.gif
 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c.gif
DA2032-AL 200 330 100 13 50,4 44,4 44 28 4 2 9,6 0,4
DA2033-AL 200 330 100 13 50,4 44,4 44 24 4 2 10,56 0,4
DA2034-AL 175 330 100 13 50,4 44,4 44 32 4 2 11,9 0,4

一般规格

核心材料:
Ferrite
重量:
DA2032: 5.9 g; DA2033: 8.2 g; DA2034: 14.1g
包装:
DA2032-AL 200 per 13″ reel. Plastic tape: 44 mm wide, 0.4 mm thick, 28 mm pocket spacing, 9.6 mm pocket depth
DA2033-AL 200 per 13″ reel. Plastic tape: 44 mm wide, 0.4 mm thick, 24 mm pocket spacing, 10.56 mm pocket depth
DA2034-AL 175 per 13″ reel. Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 11.9 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested with pure water or alcohol only. More info.

相关产品

相关产品系列