View:
介绍
规格
环境
性能曲线
原理图
物理特性
卷装
焊接/清洗

Datasheet 3D Model TLVR Multiphase Magnetics

SLV1211 Series

TLVR Shielded Power Inductors

The SLV1211 Series Trans-Inductor Voltage Regulator (TLVR) inductors are designed for use in voltage regulator modules (VRMs) and point-of-load (PoL) converters. With a compact 12 × 6 mm footprint and high power density, these inductors deliver efficient performance in space-constrained designs. This series provides low DCR, tight magnetic coupling, and excellent thermal performance, enabling fast transient response and supporting current ratings up to 150 A. The SLV1211 is well-suited for next-generation CPUs, GPUs, ASICs, and SoCs used in servers, data centers, and various power applications.

Trans-inductor Voltage Regulator (TLVR) inductor
Optimized for fast transient response in multi-phase converter designs
High efficiency with low DCR
High saturation current up to 152 A

立即购买:

零件号

查找我的元件

索取样品:

零件号

查找我的元件

规格

Electrical specifications at 25°C.

零件号	电感 (nH) 1 (公差: ±10%)	DCR ± 10% (mΩ) 2		SRF typ (MHz)	Isat (A) 3			Irms (A) 4
零件号	电感 (nH) 1 (公差: ±10%)	Pri	Sec	SRF typ (MHz)	at 25°C	at 100°C	at 125°C	20°C rise	40°C rise
SLV1211-700KED	70	0.125	0.41	183	152	133	126	43	60
SLV1211-101KED	100	0.125	0.41	138	125	102	97	43	60
SLV1211-121KED	120	0.125	0.41	114	105	87	82	43	60
SLV1211-161KED	160	0.125	0.41	96	77	62	58	43	60
SLV1211-181KED	180	0.125	0.41	79	69	54	51	43	60
SLV1211-201KED	200	0.125	0.41	66	59	47	43	43	60

注释

Inductance at 100 kHz, 0.1 Vrms, 0 Adc.
DCR is measured on a micro-ohmmeter at points indicated in the diagram below.
Isat: DC current that causes a 20% (typ) inductance drop from its value without current. Temperature derating curves.
Irms: Current applied to the primary winding (pins 1 – 4) that causes the specified temperature rise from a 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, air flow, and proximity to other components. Therefore temperature rise should be verified in application conditions. Temperature derating curves.

端子:

RoHS compliant matte tin over nickel over copper.

包装:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (450 parts per reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).

环境

环境:

符合RoHS , 无卤素

环境温度范围:

–40°C to +85°C with (40°C rise) Irms

储存温度范围:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

最高元件温度:

+125°C (ambient + temp rise)

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

性能曲线

L vs Frequency

L vs Current vs Temperature

原理图

物理特性

卷装规格

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
450	330	100	13	30,4	24,4	24	12	4	2	11,45	0,5

一般规格

核心材料:

Ferrite

重量:

3.5 – 3.6 g

包装:

450/13″ reel; Plastic tape: 24 mm wide, 0.5 mm thick, 12 mm pocket spacing, 11.45 mm pocket depth

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

SLV1211 Series

TLVR Shielded Power Inductors

规格

端子:

包装:

性能曲线

L vs Frequency

L vs Current vs Temperature

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

SLV9080 Series

仓库

语言设定

货币设定

SLV1211 Series

TLVR Shielded Power Inductors

所选配置不可用

规格

端子:

包装:

性能曲线

L vs Frequency

L vs Current vs Temperature

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

SLV9080 Series

警告