サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

XGL1010 Series

Ultra-Low Loss Shielded Power Inductors

RoHS準拠 ハロゲンフリー AEC-Q flag
XGL1010 molded power inductors offer our lowest DC losses and extremely low power losses for a wide range of DC-DC converters.  Additional performance benefits include a wider range of inductance values and improved Irms current ratings.
  • Industry’s lowest DCR and low power losses
  • Wide inductance range up to 56 µH
  • High current handling with soft saturation characteristics
  • AEC-Q200 Grade 1 (–40°C to +125°C) with a 165°C max part temperature
今すぐ購入:
個数 単価
1 $5.41
100 $4.74
300 $3.55
600 $2.14
1200 $1.67
2400 $1.43
5000 $1.32

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:

仕様

Electrical specifications at 25°C. Operating voltage 0 — 60 V

部品番号 1 インダクタンス (µH) 2
(公差: ±20%)
DCR (mΩ) 3 SRF typ (MHz) 4 Isat (A) 5 Irms (A) 6
typ max 10% drop 20% drop 30% drop 20°C rise 40°C rise
XGL1010-271MED 0.27 0.47 0.57 96.0 44.0 74.0 117.0 40.8 54.0
XGL1010-521MED 0.52 0.68 0.80 56.0 33.0 54.0 76.0 39.8 52.0
XGL1010-801MED 0.80 0.88 1.1 47.0 29.0 46.0 64.0 36.0 48.0
XGL1010-122MED 1.2 1.2 1.4 37.0 24.0 39.0 50.0 31.5 41.5
XGL1010-152MED 1.5 1.5 1.7 31.0 21.0 33.0 45.0 31.1 40.7
XGL1010-222MED 2.2 2.3 2.6 25.0 15.0 26.0 36.0 24.6 33.0
XGL1010-332MED 3.3 3.2 3.7 21.0 14.0 24.0 34.0 19.2 26.0
XGL1010-472MED 4.7 4.0 4.6 18.0 12.0 21.0 29.0 18.0 24.7
XGL1010-562MED 5.6 5.2 5.9 16.0 10.0 17.0 24.0 17.5 24.0
XGL1010-682MED 6.8 6.2 7.0 14.0 9.3 16.0 22.0 15.7 21.2
XGL1010-822MED 8.2 8.0 9.0 13.0 8.7 14.0 20.0 14.1 18.7
XGL1010-103MED 10 8.7 9.7 12.0 8.3 13.0 18.0 13.7 18.2
XGL1010-153MED 15 13.6 15.2 10.0 7.0 11.0 16.0 11.4 15.4
XGL1010-223MED 22 19.6 22.0 8.0 5.6 9.3 13.0 9.8 13.2
XGL1010-333MED 33 29.9 33.5 6.6 4.6 7.6 10.0 6.1 8.5
XGL1010-473MED 47 40.9 46.9 4.9 3.7 6.1 8.4 5.1 7.0
XGL1010-563MED 56 49.9 55.9 4.6 3.3 5.3 7.6 4.6 6.3
メモ
  1. When ordering, please specify termination code: e.g. XGL1010-563MED
  2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
  3. DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
  4. SRF measured using an Agilent/HP 4395A or equivalent.
  5. Isat: DC current at 25°C that causes the specified inductance drop from its value without current.
    Temperature derating curves.
  6. Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
    Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.

終端処理:

  • E = Halogen free component. RoHS compliant tin-silver over copper terminations.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
  • S = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

  • D = 13" machine-ready reel
    EIA-481 embossed plastic tape (300 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
環境
環境:
RoHS準拠 , ハロゲンフリー
周囲温度範囲:
–40°C to +125°C with (40°C rise) Irms current
保管温度範囲:
Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C
最大部品温度:
+165°C (ambient + temp rise)
時間内の障害(FIT)/平均障害間隔(MTBF):

性能曲線

L vs Frequency

L vs Current

物理的特徴

xgl1010d.gif

dims_inches_mm.gif

テープ&リール仕様

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_an.gif
300 330 100 13 30,4 24,4 24 16 4 2 10,21 0,4

一般仕様

コア材料:
Composite
重量:
6.0 – 6.9 g
パッケージ:
300/13″ reel Plastic tape: 24 mm wide, 0.40 mm thick, 16 mm pocket spacing, 10.21 mm pocket depth.

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

関連製品シリーズ

関連製品ファミリー