Datasheet 3Dモデル S-Param

CMA1305-225

部品の詳細情報と仕様について

シリーズへ移動

今すぐ購入:

サンプルを依頼:

デザイナーズキット:

キット	値	価格
C523	12 values (3 of each)	$79.00

仕様

Electrical specifications at 25°C.

部品番号 1	ライン	コモンモードピークインピーダンス (kΩ)	最小インダクタンス (mH) 2	インダクタンス (mH) 2	Irms (A) 3	DCR max (mΩ) 4	絶縁電圧 (Vrms) 5
部品番号 1	ライン	コモンモードピークインピーダンス (kΩ)	最小インダクタンス (mH) 2	インダクタンス (mH) 2	Irms (A) 3	DCR max (mΩ) 4	絶縁電圧 (Vrms) 5
CMA1305-225LD	2	8.1 @ 2.1 MHz	1.43	2.2	1.2	208	1500

メモ

Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic tape. See packaging info below for tape and reel quantities.
Inductance shown for each winding. Measurement details are part number specific. See part number page in datasheet for details.
Current flows through both windings connected in series that causes a 40°C rise. This information is for reference only and does not represent absolute maximum ratings.
DCR is specified per winding.
Isolation (hipot) measured for 1 minute.

終端処理:

RoHS compliant tin-silver over copper.

パッケージ:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
- CMA1305: 600 parts per full reel
- CMA1609: 350 parts per full reel
- CMA1910: 250 parts per full reel
- CMA3113: 120 parts per full reel

環境

環境:

RoHS準拠

周囲温度範囲:

–40°C to +125°C with Irms current

保管温度範囲:

Component: –40°C to +155°C.
Tray packaging: –40°C to +80°C

最大部品温度:

+155°C (ambient + temp rise)

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

物理的特徴

See datasheet for dimensional drawings.

Part number	L max in/mm	W max in/mm	H max in/mm	Weight (g)
CMA1305-474LD	0.51 / 13,0	0.51 / 13,0	0.22 / 5,6	1.5
CMA1305-105LD	0.51 / 13,0	0.51 / 13,0	0.22 / 5,6	1.5
CMA1305-225LD	0.51 / 13,0	0.51 / 13,0	0.22 / 5,6	1.5
CMA1609-474LD	0.645 / 16,38	0.56 / 14,22	0.35 / 8,9	2.3
CMA1609-105LD	0.645 / 16,38	0.56 / 14,22	0.35 / 8,9	2.3
CMA1609-225LD	0.645 / 16,38	0.56 / 14,22	0.35 / 8,9	2.3
CMA1910-474LD	0.77 / 19,56	0.77 / 17,75	0.39 / 9,9	4.2
CMA1910-105LD	0.77 / 19,56	0.77 / 17,75	0.39 / 9,9	4.2
CMA1910-225LD	0.77 / 19,56	0.77 / 17,75	0.39 / 9,9	4.2
CMA3113-474LD	1.22 / 31,0	1.22 / 26,0	0.51 / 13,0	12.5
CMA3113-105LD	1.22 / 31,0	1.22 / 26,0	0.51 / 13,0	12.5
CMA3113-225LD	1.22 / 31,0	1.22 / 26,0	0.51 / 13,0	12.5

テープ＆リール仕様

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)
	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
CMA1305	600	330	100	13	30,4	24,4	24	16	4	2	5,5	0,4
CMA1609	350	330	100	13	30,4	24,4	24	20	4	2	9,10	0,5
CMA1910	250	330	100	13	38,4	32,4	32	24	4	2	10,1	0,5
CMA3113	120	330	100	13	50,4	44,4	44	40	4	2	12,4	0,5

一般仕様

コア材料:

Ferrite

重量:

See table under Physical Characteristics

パッケージ:

CMA1305: 600/13″ reel Plastic tape: 24 mm wide, 0.4 mm thick, 16 mm pocket spacing, 5.5 mm pocket depth
CMA1609: 350/13″ reel Plastic tape: 24 mm wide, 0.5 mm thick, 20 mm pocket spacing, 9.10 mm pocket depth
CMA1910: 250/13″ reel Plastic tape: 32 mm wide, 0.5 mm thick, 24 mm pocket spacing, 10.1 mm pocket depth
CMA3113: 120/13″ reel Plastic tape: 44 mm wide, 0.5 mm thick, 40 mm pocket spacing, 12.4 mm pocket depth

Winding to Winding Isolation:

1500 Vrms

洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

倉庫

言語の設定

通貨の設定

CMA1305-225

選択された構成はご購入いただけません

仕様

終端処理:

パッケージ:

物理的特徴

See datasheet for dimensional drawings.

テープ＆リール仕様

一般仕様

洗浄

関連製品

CMA1305-474

CMA1305-105

CMA1609-474

CMA1609-105

CMA1609-225

CMA1910-474

CMA1910-105

CMA1910-225

CMA3113-474

CMA3113-105

CMA3113-225

関連製品シリーズ

BU Series

CD1479-AL Common Mode Choke

CD1480-BL Common Mode Choke

CMH, CMV Series

CE1755-AL Common Mode Choke

CE1759-AL Common Mode Choke

CE2439L Common Mode Choke

DFC7045 Series

CF2638L Common Mode Choke

LPD5030V Series

CF2805-AL Common Mode Choke

SBU9 Series

CF3094-AL Common Mode Choke

Toroidal Common Mode Line Chokes

CG3333-AL Common Mode Choke

CMT Series

CG3528-AL Common Mode Choke

G6252-AL

CG3885-AL Common Mode Choke

Common Mode Line Chokes

CH4659-AL Common Mode Choke

Common Mode Line Chokes

CJ5094-CL Common Mode Choke

CM6518-AL Common Mode Choke

CR7915-AL Common Mode Choke

CV9172-AL SM Common Mode Choke

警告